Search results
Results From The WOW.Com Content Network
This is a list of interface bit rates, ... Modem 9600 (2400 baud; V.32) ... all stations share the medium.
For example, in a 64QAM modem, M = 64, and so the bit rate is N = log 2 (64) = 6 times the baud rate. In a line code, these may be M different voltage levels. The ratio is not necessarily an integer; in 4B3T coding, the bit rate is 4 / 3 of the baud rate. (A typical basic rate interface with a 160 kbit/s raw data rate operates at 120 kBd.)
For this reason, the baud rate value will often be lower than the gross bit rate. Example of use and misuse of "baud rate": It is correct to write "the baud rate of my COM port is 9,600" if we mean that the bit rate is 9,600 bit/s, since there is one bit per symbol in this case. It is not correct to write "the baud rate of Ethernet is 100 ...
Transmitting at 1,200 baud produced the 4,800 bit/s V.27ter standard, and at 2,400 baud the 9,600 bit/s V.32. The carrier frequency was 1,650 Hz in both systems. The introduction of these higher-speed systems also led to the development of the digital fax machine during the 1980s.
In telecommunications and computing, bit rate (bitrate or as a variable R) is the number of bits that are conveyed or processed per unit of time. [1]The bit rate is expressed in the unit bit per second (symbol: bit/s), often in conjunction with an SI prefix such as kilo (1 kbit/s = 1,000 bit/s), mega (1 Mbit/s = 1,000 kbit/s), giga (1 Gbit/s = 1,000 Mbit/s) or tera (1 Tbit/s = 1,000 Gbit/s). [2]
The V.42, V.42bis and V.44 standards allow modems to accept compressed data at a rate faster than the line rate. These algorithms use data compression to achieve higher throughput. For instance, a 53.3 kbit/s connection with V.44 can transmit up to 53.3 × 6 = 320 kbit/s if the offered data stream can be compressed that much.
Data signaling rate or gross bit rate, a bit rate that includes protocol overhead; Symbol rate or baud rate, the number of symbol changes, waveform changes, or signaling events across the transmission medium per unit of time; Data-rate units, measures of the bit rate or baud rate of a link
The abbreviation is usually given together with the line speed in bits per second, as in "9600–8-N-1". The speed (or baud rate) includes bits for framing (stop bits, parity, etc.), thus the effective data rate is lower than the baud rate. For 8-N-1 encoding, only 80% of the bits are available for data (for every eight bits of data, ten bits ...