Ad
related to: difference between dies and mold on wood sheets video for beginners full
Search results
Results From The WOW.Com Content Network
Steel-rule die, also known as cookie cutter dies, are used for cutting sheet metal and softer materials, such as plastics, wood, cork, felt, fabrics, and paperboard. The cutting surface of the die is the edge of hardened steel strips, known as steel rule. These steel rules are usually located using saw or laser-cut grooves in plywood.
Rotary die cutting is die cutting using a cylindrical die on a rotary press and may be known as a rotary die cutter or RDC. A long sheet or web of material will be fed through the press into an area known as a "station" which holds a rotary tool that will cut out shapes, make perforations or creases, or even cut the sheet or web into smaller parts.
The pattern is lifted from the sand, leaving a molding cavity. A passageway for metal to enter the mold, called a "gate", is then cut from the sprue hole to the void left by the pattern, and a runner is cut from the sand to allow metal to flow into the riser. The flask is then put back together, and metal can be poured into the mold.
A common post-extrusion process for plastic sheet stock is thermoforming, where the sheet is heated until soft (plastic), and formed via a mold into a new shape. When vacuum is used, this is often described as vacuum forming. Orientation (i.e. ability/ available density of the sheet to be drawn to the mold which can vary in depths from 1 to 36 ...
Shearing may be permitted only in certain areas of the sheet due to limitations of the machinery (e.g. always across the whole sheet); Some cutting technologies (plasma) require some minimal offset between the parts; Nesting software may also have to take into account material characteristics, such as: Defects on material that must be discarded;
Because this difference is quite small there is much overlap in the terminology. Non-proprietary terms that have been used to describe these processes include: cavityless casting, [ 2 ] evaporative foam casting, foam vaporization casting, lost pattern casting, the castral process, and expanded polystyrene molding.
Shearing, also known as die cutting, [1] is a process that cuts stock without the formation of chips or the use of burning or melting. Strictly speaking, if the cutting blades are straight the process is called shearing; if the cutting blades are curved then they are shearing-type operations. [ 2 ]
The second die type, known as a pressure type die, relies on contact between the jacketing polymer and bare wire inside the die. In this die type, a ring of polymer melt under pressure is forced around the bare wire. Due to the applied pressure of the melt, the opening around the inlet for the bare wire must be very small, on the order of 0.05 mm.