Search results
Results From The WOW.Com Content Network
The proportional counter is a type of gaseous ionization detector device used to measure particles of ionizing radiation.The key feature is its ability to measure the energy of incident radiation, by producing a detector output pulse that is proportional to the radiation energy absorbed by the detector due to an ionizing event; hence the detector's name.
A wire chamber or multi-wire proportional chamber is a type of proportional counter that detects charged particles and photons and can give positional information on their trajectory, [1] by tracking the trails of gaseous ionization. [2]
The term "gas proportional detector" (GPD) is generally used in radiometric practice, and the property of being able to detect particle energy is particularly useful when using large area flat arrays for alpha and beta particle detection and discrimination, such as in installed personnel monitoring equipment. The wire chamber is a multi ...
In an ionisation type smoke detector, ambient air is allowed to freely enter the ionization chamber. The chamber contains a small amount of americium-241, which is an emitter of alpha particles which produce a constant ion current. If smoke enters the detector, it disrupts this current because ions strike smoke particles and are neutralized ...
Boron-lined gas-filled proportional counters react similarly to BF 3 gas-filled proportional detectors, but instead of containing boron-rich gas, the walls are coated with 10 B with another fill gas. In this design, since the reaction takes place on the surface, only one of the two particles will escape into the proportional counter.
In 1974, William J. Willis and Veljko Radeka demonstrated [4] that total absorption calorimetry was possible in liquid argon detectors without the amplification that normally occurs in a gaseous ionization detector. This critical technology enabled the possibility of a time projection chamber based on Nygren's original design, but using liquid ...
In experimental and applied particle physics, nuclear physics, and nuclear engineering, a particle detector, also known as a radiation detector, is a device used to detect, track, and/or identify ionizing particles, such as those produced by nuclear decay, cosmic radiation, or reactions in a particle accelerator. Detectors can measure the ...
Alpha scintillation probe under calibration. The most commonly used hand-held survey meters are the scintillation counter, which is used in the measurement of alpha, beta and neutron particles; the Geiger counter, widely used for the measurement of alpha, beta and gamma levels; and the ion chamber, which is used for beta, gamma and X-ray measurements.