Search results
Results From The WOW.Com Content Network
Rollout or rollout allowance is an adjustment in timed acceleration runs used by North-American drag racing and enthusiast magazines [citation needed] to create approximate parity over time between historic 0 to 60 mph and 1/4 mile acceleration times and those measured today using the Global Positioning System (GPS).
A dragstrip is a facility for conducting automobile and motorcycle acceleration events such as drag racing. Although a quarter mile (1320 feet, 402 m) is the best known measure for a drag track, many tracks are eighth mile (201 m) tracks, and the premiere classes will run 1,000 foot (304.8 m) races.
Gear inches is one way of measuring the gear ratio(s) of a bicycle, so that different gears and different bicycles can be compared in a consistent manner. Gear inches is an imperial measure corresponding to the diameter in inches of the drive wheel of a penny-farthing bicycle with equivalent ( direct-drive ) gearing.
For 1980, a wide-ratio gearset was released for the A904, A998, and A999, with 2.74:1 in first, 1.54 in second, and 1.00 in third. Torqueflite was an available option or standard equipment, depending on model and year, on all Chrysler products: Plymouth , Dodge , DeSoto , Chrysler and Imperial .
Crawl ratio is a term used in the automotive world to describe the highest gear ratio that a vehicle is capable of. Note that gear ratio, also known as speed ratio, of a gear train is defined as the ratio of the angular velocity of the input gear to the angular velocity of the output gear, and thus a higher gear ratio implies a larger speed reduction, i.e. the input speed is reduced more at ...
The composite action test (double flank) is a method of inspection in which the work gear is rolled in tight double flank contact with a master gear or a specified gear, in order to determine (radial) composite variations (deviations). The composite action test must be made on a variable center distance composite action test device.
Drawbar pull is a function of velocity, and in general decreases as the speed of the vehicle increases (due both to increasing resistance and decreasing transmission gear ratios). Drawbar pull is the difference between tractive effort available and tractive effort required to overcome resistance at a specified speed.
TREMEC engineers have recommended Texaco-Havoline Dexron III/Mercon Non-Synthetic ATF. There has been a significant amount of confusion regarding the proper capacity and proper type of ATF for the TR-3650 which may have a correlation with a rather large number of complaints about notchy shifting, shift "nibbling", noisy synchros, and grinding gears.