Search results
Results From The WOW.Com Content Network
Both the conical plate centrifuge and chamber bowl centrifuge can be used for liquid/liquid and solid/liquid separation. However, the advantage of conical plate centrifuge over chamber bowl centrifuge is that solid discharge is possible in conical plate. The chamber bowl has a high capacity for solids but there is no solid discharge.
The decanter centrifuge is versatile as different lengths of the cylindrical bowl section and the cone angle can be selected for different applications. Also, the system can be pre-programmed with various design curves to predict the sludge type, while some competitive processes, such as a belt filter press, cannot change the belt type to ...
A centrifuge is a device that uses centrifugal force to subject a specimen to a specified constant force - for example, to separate various components of a fluid. This is achieved by spinning the fluid at high speed within a container, thereby separating fluids of different densities (e.g. cream from milk) or liquids from solids.
A cone clutch serves the same purpose as a disk or plate clutch; however, instead of mating two spinning disks, the cone clutch uses two conical surfaces to transmit torque by friction. [ 1 ] The cone clutch transfers a higher torque than plate or disk clutches of the same size due to the wedging action and increased surface area.
Diagram of a gas centrifuge with countercurrent flow, used for separating isotopes of uranium. A gas centrifuge is a device that performs isotope separation of gases. A centrifuge relies on the principles of centrifugal force accelerating molecules so that particles of different masses are physically separated in a gradient along the radius of a rotating container.
Thus, conical-cylindrical bowl design is the most widely used in the industry today. A typical conical-cylindrical solid bowl centrifuge design contains a rotating bowl unit connected to a conveyor with a gear system. The gear system allows the rotating bowl and the conveyor to rotate at different speeds but in the same direction.
Decanter centrifuge; Dropping funnels are similar in shape and design, and may be used as separatory funnels. They have standard taper ground glass joints at the stem. Partition coefficient is a measure of the distribution of an analyte between the two phases in a separation.
With the plate packs, water is fed into the separator through gravity through the inlet pipe, then the mixture is spread evenly through the separation chamber where the coalescing plate packs are. In the plate packs the oil will rise because of their buoyancy and coalesce on the underside of the plates and form globules of oil that rise to the ...