Ads
related to: trick for hot caustic bluing for metal polish on concrete blocks and stones
Search results
Results From The WOW.Com Content Network
Rust bluing was developed between hot and cold bluing processes, and was originally used by gunsmiths in the 19th century to blue firearms prior to the development of hot bluing processes. The process was to coat the gun parts in an acid solution, let the parts rust uniformly, then immerse the parts in boiling water to convert the red oxide Fe
Phosphate conversion coating is a chemical treatment applied to steel parts that creates a thin adhering layer of iron, zinc, or manganese phosphates to improve corrosion resistance or lubrication or as a foundation for subsequent coatings or painting.
When it is heated to red-hot and quenched, the edge cools quickly, becoming very hard, but the rest cools slowly, becoming much softer. [5] [6] The insulation layer is quite often a mixture of clays, ashes, polishing stone powder, and salts, which protects the back of the blade from cooling very quickly when quenched.
Quench polish quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer or Melonite. [ 1 ]
Polishing lines will be soft and less reflective than a #4 architectural finish. #7 Finish. A #7 finish is produced by polishing with a 280–320 grit belt or wheel and sisal buffing with a cut and color compound. This is a semi-bright finish that will still have some polishing lines but they will be very dull.
Aqua fortis /spirit of nitre – nitric acid, formed by 2 parts saltpetre in 1 part (pure) oil of vitriol (sulfuric acid). (Historically, this process could not have been used, as 98% oil of vitriol was not available.) Aqua ragia /spirit of turpentine/oil of turpentine/gum turpentine – turpentine, formed by the distillation of pine tree resin.