Ads
related to: minimum aluminum extrusion thickness
Search results
Results From The WOW.Com Content Network
For example, minimum thickness of extruded carbon steel sheet is 3mm whereas same sheet of aluminium can be extruded into minimum sheet thicknesses of 1mm. A variety of materials such as Carbon steel, aluminium, titanium , magnesium , ABS and PVC etc. can be manufactured via extrusion processes.
Sharp corners should be avoided; for aluminium and magnesium the minimum radius should be 0.4 mm (1/64 in) and for steel corners should be 0.75 mm (0.030 in) and fillets should be 3 mm (0.12 in). The following table lists the minimum cross-section and thickness for various materials. [1]
The minimum amount of radius required to avoid any defect and problems depends on the extrudability of the material, as the material is more extrudable it can flow in corners with less radius. For example, for Aluminium, Magnesium and Copper alloys the minimum radius required for corners and edges is 0.75 mm whereas for ferrous metals for ...
T1 temper 6063 has an ultimate tensile strength of at least 120 MPa (17,000 psi) in thicknesses up to 12.7 mm (0.5 in), and 110 MPa (16,000 psi) from 13 to 25 mm (0.5 to 1 in) thick, and yield strength of at least 62 MPa (9,000 psi) in thickness up to 13 millimetres (0.5 in) and 55 MPa (8,000 psi) from 13 mm (0.5 in) thick.
6061 is an alloy used in the production of extrusions—long constant–cross-section structural shapes produced by pushing metal through a shaped die. Cold and Hot Stamping. 6061 sheet in the T4 condition can be formed with limited ductility in the cold state.
In the AA system, the second two digits reveal the minimum percentage of aluminium, e.g. 150.x correspond to a minimum of 99.50% aluminium. The digit after the decimal point takes a value of 0 or 1, denoting casting and ingot respectively. [1] The main alloying elements in the AA system are as follows: [51] 1xx.x series are minimum 99% aluminium