Search results
Results From The WOW.Com Content Network
To convert the Vickers hardness number to SI units the hardness number in kilograms-force per square millimeter (kgf/mm 2) has to be multiplied with the standard gravity, , to get the hardness in MPa (N/mm 2) and furthermore divided by 1000 to get the hardness in GPa.
= 9.964 016 418 183 52 × 10 3 N: newton (SI unit) N A force capable of giving a mass of one kilogram an acceleration of one metre per second per second. [32] = 1 N = 1 kg⋅m/s 2: ounce-force: ozf ≡ g 0 × 1 oz = 0.278 013 850 953 781 25 N: pound-force: lbf: ≡ g 0 × 1 lb = 4.448 221 615 2605 N: poundal: pdl ≡ 1 lb⋅ft/s 2 = 0.138 254 ...
{{convert|100|Mm|mm}} → 100 megametres (1.0 × 10 11 mm) The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination output units are listed below in column 7. {{convert|55|nmi|km mi}} → 55 nautical miles (102 km; 63 mi)
A bolt with property class 12.9 has a tensile strength of 1200 MPa (1 MPa = 1 N/mm 2) or 1.2 kN/mm 2 and the yield strength is 0.90 times tensile strength, 1080 MPa in this case. A bolt with property class 4.6 has a tensile strength of 400 MPa (1 MPa = 1 N/mm 2 ) or 0.4 kN/mm 2 and yield strength is 0.60 times tensile strength, 240 MPa in this ...
The centipoise is convenient because the viscosity of water at 20 °C is about 1 cP, and one centipoise is equal to the SI millipascal second (mPa·s). The SI unit of kinematic viscosity is square meter per second (m 2 /s), whereas the CGS unit for kinematic viscosity is the stokes (St, or cm 2 ·s −1 = 0.0001 m 2 ·s −1 ), named after Sir ...
In SI units, the unit is converted to the SI derived unit pascal (Pa), which is defined as one newton per square metre (N/m 2). A newton is equal to 1 kg⋅m/s 2 , and a kilogram-force is 9.80665 N, [ 3 ] meaning that 1 kgf/cm 2 equals 98.0665 kilopascals (kPa).
The SI unit, pascal, is sometimes used instead: 1 kg f ⋅mm −2 = 9.80665 MPa. The test was developed by Frederick Knoop [ 2 ] and colleagues at the National Bureau of Standards (now NIST ) of the United States in 1939, and is defined by the ASTM E384 standard.
ISO 18265: "Metallic materials — Conversion of hardness values" (2013) ASTM E140-12B(2019)e1: "Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness" (2019)