Ads
related to: antenna receiver map definition
Search results
Results From The WOW.Com Content Network
Antenna diversity is especially effective at mitigating these multipath situations. This is because multiple antennas offer a receiver several observations of the same signal. Each antenna will experience a different interference environment. Thus, if one antenna is experiencing a deep fade, it is likely that another has a sufficient signal ...
The receiving antenna height of 10m dates from the 1950s when receivers were relatively insensitive and used rooftop antennas. Although this may seem unrealistic for typical situations today, when combined with the above threshold it is considered a good proxy for providing coverage to more sensitive modern receivers used without external ...
An antenna lead-in is the transmission line, or feed line, which connects the antenna to a transmitter or receiver. The "antenna feed" may refer to all components connecting the antenna to the transmitter or receiver, such as an impedance matching network in addition to the transmission line. In a so-called "aperture antenna", such as a horn or ...
A television antenna, also called a television aerial (in British English), is an antenna specifically designed for use with a television receiver (TV) to receive terrestrial over-the-air (OTA) broadcast television signals from a television station.
Line of sight (LoS) propagation from an antenna. Line-of-sight propagation is a characteristic of electromagnetic radiation or acoustic wave propagation which means waves can only travel in a direct visual path from the source to the receiver without obstacles. [1] Electromagnetic transmission includes light emissions traveling in a straight line.
Patch antenna gain pattern. A directional antenna or beam antenna is an antenna which radiates or receives greater radio wave power in specific directions. Directional antennas can radiate radio waves in beams, when greater concentration of radiation in a certain direction is desired, or in receiving antennas receive radio waves from one specific direction only.
Antennas are generally sensitive to signals only when they have a length that is a significant portion of the wavelength, or larger. Most antennas are at least 1 ⁄ 4 of the wavelength, more commonly 1 ⁄ 2 – the half-wave dipole is a very common design. For longwave use, this resulted in loop antennas tens of feet on a side, often with ...
When modeling spatial correlation it is useful to employ the Kronecker model, where the correlation between transmit antennas and receive antennas are assumed independent and separable. This model is reasonable when the main scattering appears close to the antenna arrays and has been validated by both outdoor and indoor measurements. [2] [3]