Ad
related to: is aux input or output
Search results
Results From The WOW.Com Content Network
In a common configuration, a post-fader aux-send output is connected to the audio input of an outboard (i.e., an external [usually rack-mounted] unit that is not part of the mixer console) audio effects unit (most commonly a temporal/time-based effect such as reverb or delay; compressors and other dynamic processors would normally be on an ...
† Although the mic input is usually mono, the input is still a TRS phone socket. Many mono 'computer' mics are fitted with TRS plugs. The tip is for the MIC and the ring is for power (to power an electret-condenser style MIC). There are exceptions to the above: Hosa cables use grey and orange for left and right analogue channels.
Audio signal received through the LINE input of the mixer, usually connected to an external jack (colored light blue in PC99), which can be used to connect a HiFi amplifier, tuner, iPod, television, etc. Aux in stereo: Audio signal received through the AUX input of the mixer. This mixer input is not used by all PCs. PC speaker mono
Most of the voltage asserted by the output appears across the input impedance and almost none of the voltage is dropped across the output. [5] The line input acts similarly to a high impedance voltmeter or oscilloscope input, measuring the voltage asserted by the output while drawing minimal current (and hence minimal power) from the source ...
The intended application for a phone connector has also resulted in names such as audio jack, headphone jack, stereo plug, microphone jack, aux input, etc. Among audio engineers, the connector may often simply be called a quarter-inch to distinguish it from XLR, another frequently-used audio connector.
An audio interface is a piece of computer hardware that allows the input and output of audio signals to and from a host computer or recording device. Audio interfaces are closely related to computer sound cards , but whereas sound cards are optimized for audio playback an audio interface is primarily intended to provide low-latency analog-to ...
Most mixers have at least one additional output besides the main mix. These are either individual bus outputs or auxiliary outputs, used, for instance, to output a different mix to onstage monitors. The meters may be above the input and master sections or they may be integrated into the input and master sections themselves.
Inserts might be found on monoaural mixer inputs, monoaural and stereo subgroups, auxiliary inputs, main outputs and matrix outputs, but are rarely found on stereo line level inputs. EQs are commonly inserted on monitor mixer output mixes so that the monitor engineer can use his own wedge and the pre-fade listen bus to hear what the artist's ...