Ads
related to: hydraulic pressure bypass valve
Search results
Results From The WOW.Com Content Network
A relief valve DN25 on cooling water pipe from heat exchanger Schematic diagram of a conventional spring-loaded pressure relief valve. A relief valve or pressure relief valve (PRV) is a type of safety valve used to control or limit the pressure in a system; excessive pressure might otherwise build up and create a process upset, instrument or equipment failure, explosion, or fire.
In this method steam is passed through a restricted passage thereby reducing its pressure across the governing valve. [2] The flow rate is controlled using a partially opened steam control valve. The reduction in pressure leads to a throttling process in which the enthalpy of steam remains constant. [1] Figure1: 2-D schematic of throttle governor
A blowoff valve (also called dump valve or compressor bypass valve) is a pressure release system present in most petrol turbocharged engines. Blowoff valves are used to reduce pressure in the intake system as the throttle is closed, thus preventing compressor surge .
Surge control products have been used in many industries to protect the maximum working pressure of hydraulic system for decades. Typical applications for surge relief equipment is in pipelines at pump stations, receiving manifolds at storage facilities, back pressure control, marine loading/off loading, site specific applications where pressure surges are generated by the automation system ...
Pressure regulator or pressure reducing valve (PRV): reduces pressure to a preset level downstream of the valve; Pressure sustaining valve, or back-pressure regulator: maintains pressure at a preset level upstream of the valve; Presta valve, Schrader valve, or Dunlop valve, holds the air inside bicycle tires; Pulse valve, extremely fast pulsing ...
When hydraulic pressure is applied down a control line, the hydraulic pressure forces a sleeve within the valve to slide downwards. This movement compresses a large spring and pushes the flapper downwards to open the valve. When hydraulic pressure is removed, the spring pushes the sleeve back up and causes the flapper to shut.