Ad
related to: deck mounted vs surface taps for steel beams and frames manufacturers
Search results
Results From The WOW.Com Content Network
A slab deck is one where the deck is analyzed as a plate. If the slab has a stiffness that is different in two directions (at right angles), then the deck is known and analyzed as an orthotropic deck. A beam and slab deck is one where the beams may deflect somewhat independently, and any transverse forces are carried in the deck. A cellular ...
The orthotropic deck may be integral with or supported on a grid of deck framing members, such as transverse floor beams and longitudinal girders. All these various choices for the stiffening elements, e.g., ribs, floor beams and main girders, can be interchanged, resulting in a great variety of orthotropic panels.
The central "web" of the steel I-beam is often wider than a column web to resist the higher bending moments that occur in beams. Wide sheets of steel deck can be used to cover the top of the steel frame as a "form" or corrugated mold, below a thick layer of concrete and steel reinforcing bars. Another popular alternative is a floor of precast ...
Frame numbers tell you where you are in relation to either the bow or the stern of the ship. [2] The frames support lengthwise members which run parallel to the keel, from the bow to the stern; these may variously be called stringers, strakes, or clamps. [3] The clamp supports the transverse deck beams, on which the deck is laid.
Diagram of double tee beam. A double tee or double-T beam is a load-bearing structure that resembles two T-beams connected to each other side by side. The strong bond of the flange (horizontal section) and the two webs (vertical members, also known as stems) creates a structure that is capable of withstanding high loads while having a long span.
It consists of a steel strand which is similar to the strand used in post-tensioned concrete. Beam – is a structural element that primarily resists loads applied laterally to the beam's axis. Its mode of deflection is primarily by bending. The loads applied to the beam result in reaction forces at the beam's support points.
The deflection must be considered for the purpose of the structure. When designing a steel frame to hold a glazed panel, one allows only minimal deflection to prevent fracture of the glass. The deflected shape of a beam can be represented by the moment diagram, integrated (twice, rotated and translated to enforce support conditions).
The further apart its supports, the weaker a beam bridge gets. As a result, beam bridges rarely span more than 250 feet (80 m). This does not mean that beam bridges are not used to cross great distances; it only means that a series of beam bridges must be joined together, creating what is known as a continuous span.