Search results
Results From The WOW.Com Content Network
A pusher aircraft is a type of aircraft using propellers placed behind the engines and may be classified according to engine/propeller location and drive as well as the lifting surfaces layout (conventional or 3 surface, canard, joined wing, tailless and rotorcraft), Some aircraft have a Push-pull configuration with both tractor and pusher engines.
A pusher aircraft is a type of aircraft using propellers placed behind the engines. Pushers may be classified according to lifting surfaces layout (conventional or 3 surface, canard, joined wing, tailless and rotorcraft) as well as engine/propeller location and drive. For historical interest, pusher aircraft are also classified by date.
The classic "Farman" pusher had the propeller "mounted (just) behind the main lifting surface" with the engine fixed to the lower wing or between the wings, immediately forward of the propeller in a stub fuselage (that also contained the pilot) called a nacelle. The main difficulty with this type of pusher design was attaching the tail (empennage).
Push-pull designs have the engines mounted above the wing as Dornier flying boats or more commonly on a shorter fuselage than conventional one, as for Rutan Defiant or Voyager canard designs. Twin boomers such as the Cessna Skymaster and Adam A500 have the aircraft's tail suspended via twin booms behind the pusher propeller.
This category is for aircraft constructed with a pusher configuration, where the engine is mounted with the propeller facing to the rear of the plane, such that the aircraft is "pushed" through the air, as opposed to the tractor configuration in which the aircraft is "pulled" through the air.
Waldo Waterman's first flying wing aircraft was the unofficially named Waterman Whatsit, a pusher configuration low swept-wing monoplane with fins near its wing tips. The Whatsit also featured a wing-mounted tricycle undercarriage and a trim foreplane. Powered by a 100 hp (75 kW) Kinner K-5 5-cylinder radial pusher engine, it first flew in 1932 ...
The P.B.23 was designed in 1915 as a single-seat biplane scout, with a fuselage nacelle strut-mounted between the wings. The nacelle had an open cockpit for the pilot at the front and at the rear an 80 hp (60 kW) Le Rhône 9C engine driving a pusher propeller. Twin fins and rudders were mounted on a wide-span tailplane with an elevator attached ...
Of similar configuration to the modified S.27, the S.80 was an unequal-span three-bay pusher biplane, with a nacelle mounted on the lower wing to accommodate pilot and passengers in two pairs of side-by-side seats, with the engine behind them driving a pusher propeller.