Ads
related to: diagram for a 10 pin header connector
Search results
Results From The WOW.Com Content Network
A pin header (or simply, header) is a form of electrical connector. A male pin header consists of one or more rows of metal pins molded into a plastic base, often 2.54 mm (0.1 in) apart, though available in many spacings. [1] Male pin headers are cost-effective due to their simplicity. The female counterparts are sometimes known as female ...
The UEXT connector consists of 10 pins, in a two row by five male pin configuration, with a plastic keyed-shrouded or box header (specifically BH10S). All pins have a spacing of 0.1 inch (2.54 mm). [1] [2] The socket is mated with a 2×5 (10-pin) IDC female connector, and typically connected to a ribbon cable.
Jack (least-movable connector of a connector pair), jack connector (connector may have "male" pin contacts and/or "female" socket contacts) all types of connectors, including pin headers. JP: Jumper (link) K: Relay or contactor: L: Inductor or coil or ferrite bead: LD, LED: LED: often changed to "D" for diode LS, SPK: Loudspeaker or buzzer: M ...
JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors. [ 2 ] [ 3 ] JST connectors are used in many types of products, and commonly used by electronics hobbyists and consumer products for rechargeable battery packs, battery balancers , battery eliminator circuits , 3D printers , and radio controlled servos .
In some instances USB through version 2 on motherboards – 2.54 mm pitch, 10 pins, 2×5 (2 rows of 5 pins) [9] For all of the above connectors, the computer manufacturer typically attaches a female IDC connector onto one end of a ribbon cable, and later slides that connector onto a matching male box header or pin header on the computer ...
In 20/24-pin configurations, the Mini-Fit Jr. connector (Molex Mini-fit Jr. 39-28-1203, [7] former 5566-20A or 39-28-1243, [8] former 5566-24A) may be used on ATX motherboards as the main power connector. The same style of connector, in single or paired 4-, 6-, or 8-pin configurations, may be used for additional CPU power and graphics card ...
Another common connector is a 10 × 2 pin header common on motherboards and add-in cards which is usually converted via a ribbon cable to the more standard 9-pin DE-9 connector (and frequently mounted on a free slot plate or other part of the housing). [10]
Some common pinouts [20] for 2.54 mm (0.100 in) pin headers are: ARM 2×10 pin (or sometimes the older 2×7), used by almost all ARM-based systems; MIPS EJTAG (2×7 pin) used for MIPS based systems; 2×5 pin Altera ByteBlaster-compatible JTAG extended by multiple vendors; 2×5 pin AVR extends Altera JTAG with SRST (and in some cases TRST and an ...