Ads
related to: hdmi splitter for 50 feet male to 5 girls
Search results
Results From The WOW.Com Content Network
With better quality construction and materials, including 24 AWG (0.205 mm 2) conductors, an HDMI cable can reach lengths of up to 15 meters (49 feet). [70] Many HDMI cables under 5 meters of length that were made before the HDMI 1.3 specification can work as Category 2 cables, but only Category 2-tested cables are guaranteed to work for ...
A Y-cable common in domestic settings has a stereo 3.5mm (1/8″) stereo male minijack at one end, to plug into the line- or headphone-output of an MP3 player, mobile phone, or computer soundcard, and a pair of RCA (phono) male plugs to connect to the left and right mono inputs of an external amplifier.
MMIs are usually described by their coupling ratio, [5] in which the output power of one port is compared to the total output power (summing over all output ports.) An ideal 1x2 MMI would have a 50% coupling ratio for each output port. For a real 1x2 MMI, values such as 48% and 52% may occur, due to imperfections in fabrication and manufacturing.
The various serial digital interface standards all use (one or more) coaxial cables with BNC connectors, with a nominal impedance of 75 ohms. This is the same type of cable used in analog composite video setups, which potentially makes for easier "drop in" equipment upgrades (though may be necessary for long runs at the higher bitrates for older oxidising or lower grade of cable to replaced ...
Splitter (automotive), an aerodynamic feature in cars; Splitter, a table saw safety device; Y-cable, a type of cable containing three ends of which one is a common end that in turn leads to a split into the remaining two ends; Phase splitter
A diffractive beam splitter can generate either a 1-dimensional beam array (1xN) or a 2-dimensional beam matrix (MxN), depending on the diffractive pattern on the element. The diffractive beam splitter is used with monochromatic light such as a laser beam, and is designed for a specific wavelength and angle of separation between output beams.