Ads
related to: typical business card thickness gsm arena 4 2020 schedule printable
Search results
Results From The WOW.Com Content Network
The common weight of a business card varies some by location. Generally, business cards are printed on stock that is 350 g/m 2 , 45 kg (100 lb) (weight), or 12 pt (thickness). The advent of personal laser and inkjet printers made it possible for people to print business cards at home, using specially designed pre-cut stock.
Most nations describe paper in terms of grammage—the weight in grams of one sheet of the paper measuring one square meter.. Other people, especially in the United States, describe paper in terms of pound weight—the weight in pounds per ream (500 sheets) of the paper with a given area (based on historical production sizes before trimming): for card stock, this is 20 by 26 in (508 by 660 mm ...
An "informative" (i.e. non-mandatory) annex [7] describes how an ID-000 sized card may be included in an ID-1 size card for processing (e.g. in an ID-1 reader), but with "relief areas around the perimeter of the ID-000 size card to allow it to be removed from the ID-1 size card without punching tools".
Expressed in grams (g) per square metre (g/m 2), regardless of its thickness . [1] This is the measure used in most parts of the world. It is often notated as gsm on paper product labels and spec sheets. Expressed in terms of the mass per number of sheets of a specific paper size, known as basis weight.
A0 has a surface area of 1 square metre (11 sq ft) up to a rounding error, with a width of 841 millimetres (33.1 in) and height of 1,189 millimetres (46.8 in), so an actual area of 0.999949 square metres (10.76336 sq ft); A4 is recommended as standard paper size for business, administrative and government correspondence; and A6 for postcards ...
Business cards are normally printed on stock at least 200 gm 2 (weight) or 10pt(thickness)." The 200 gsm measurement is what I believe most of the "free" business cards in the UK are printed on, which seems like a good starting point for the bottom measurement, not sure about the 10pt - seems thick to me for a bottom measurement.