Ad
related to: astm d2487 oh
Search results
Results From The WOW.Com Content Network
Classification of Soils for Engineering Purposes: Annual Book of ASTM Standards, D 2487-83, vol. 04, American Society for Testing and Materials, 1985, pp. 395– 408; Evett, Jack and Cheng Liu (2007), Soils and Foundations (7 ed.), Prentice Hall, pp. 9– 29, ISBN 978-0132221382; Specific ^
Soil texture triangle showing the USDA classification system based on grain size Map of global soil regions from the USDA. For soil resources, experience has shown that a natural system approach to classification, i.e. grouping soils by their intrinsic property (soil morphology), behaviour, or genesis, results in classes that can be interpreted for many diverse uses.
AASHTO Soil Classification System (from AASHTO M 145 or ASTM D3282) General Classification Granular Materials (35% or less passing the 0.075 mm (No. 200) sieve) Silt-Clay Materials (>35% passing the 0.075 mm (No. 200) sieve) Group Classification A-1 A-3 A-2 A-4 A-5 A-6 A-7 A-1-a A-1-b A-2-4 A-2-5 A-2-6 A-2-7 A-7-5 A-7-6 Sieve Analysis, % passing
The original Proctor test, ASTM D698 / AASHTO T99, uses a 4-inch-diameter (100 mm) by 4.584-inch-high (116.4 mm) mold which holds 1/30 cubic feet of soil, and calls for compaction of three separate lifts of soil using 25 blows by a 5.5 lb hammer falling 12 inches, for a compactive effort of 12,375 ft-lbf/ft 3.
It is codified by ASTM D4945-12 - Standard Test Method for High-Strain Dynamic Testing of Piles. High strain dynamic testing is called dynamic pile monitoring when it is applied during pile driving and dynamic load testing when it is applied following pile installation, regardless of the installation method.
The U.S. and U.K. standards defining how the test should be performed are ASTM D 3080, AASHTO T236 and BS 1377-7:1990, respectively. For rock the test is generally restricted to rock with (very) low shear strength. The test is, however, standard practice to establish the shear strength properties of discontinuities in rock.
For determining the acid value of mineral oils and biodiesel, there are standard methods such as ASTM D 974 and DIN 51558, and especially for biodiesel the European Standard EN 14104 and ASTM D664 are both widely used worldwide. [2] Acid value of biodiesel should be lower than 0.50 mg KOH/g in both EN 14214 and ASTM D6751 standard fuels.
ASTM D20-03(2014) Standard Test Method for Distillation of Road Tars D1160 Test Method for Distillation of Petroleum Products at Reduced Pressure ASTM Distillation is a subset of the standards set by the standards organization ASTM International , a voluntary standards development organizations that sets technical standards for materials ...