Search results
Results From The WOW.Com Content Network
To allow a 6to4 host to communicate with the native IPv6 Internet, it must have its IPv6 default gateway set to a 6to4 address which contains the IPv4 address of a 6to4 relay router. To avoid the need for users to set this up manually, the anycast address 192.88.99.1 used to be allocated. [ 4 ]
IPv6 Encapsulation (6to4 and 6in4) RFC 2473: 0x2A 42 SDRP Source Demand Routing Protocol: RFC 1940: 0x2B 43 IPv6-Route Routing Header for IPv6: RFC 8200: 0x2C 44 IPv6-Frag Fragment Header for IPv6: RFC 8200: 0x2D 45 IDRP Inter-Domain Routing Protocol: 0x2E 46 RSVP Resource Reservation Protocol: RFC 2205: 0x2F 47 GRE Generic Routing Encapsulation
6in4, sometimes referred to as SIT, [a] is an IPv6 transition mechanism for migrating from Internet Protocol version 4 (IPv4) to IPv6. It is a tunneling protocol that encapsulates IPv6 packets on specially configured IPv4 links according to the specifications of RFC 4213. The IP protocol number for 6in4 is 41, per IANA reservation. [1]
Packets that hold Internet Protocol data carry a 4-bit IP version number as the first field of its header. [ 1 ] [ 2 ] Currently, only IPv4 and IPv6 packets are seen on the Internet , having IP version numbers 4 and 6, respectively.
For 6to4, the most common IPv6 over IPv4 tunneling protocol, requires that the tunnel endpoint have a public IPv4 address. However, many hosts currently attach to the IPv4 Internet through one or several NAT devices, usually because of IPv4 address shortage. In such a situation, the only available public IPv4 address is assigned to the NAT ...
Some internal networks across the organization have been enabled for IPv6, and dual-stack technology is being used to enable both IPv4 and IPv6 use. A number of internal servers and client devices communicate via IPv6, and a teredo relay and 6to4 relay ensure users using these two transition technologies are well served when accessing IPV6 ...
IPv6 addresses are assigned to organizations in much larger blocks as compared to IPv4 address assignments—the recommended allocation is a / 48 block which contains 2 80 addresses, being 2 48 or about 2.8 × 10 14 times larger than the entire IPv4 address space of 2 32 addresses and about 7.2 × 10 16 times larger than the / 8 blocks of IPv4 ...
In IPv4 to IPv6 transitioning, anycast addressing may be deployed to provide IPv6 compatibility to IPv4 hosts. This method, 6to4 , uses a default gateway with the IP address 192.88.99.1 . [ 15 ] This allows multiple providers to implement 6to4 gateways without hosts having to know each individual provider's gateway addresses. 6to4 has been ...