Search results
Results From The WOW.Com Content Network
The engine was built in two displacements: 420 cubic inches (6.9 L), which was used in Ford trucks from 1983 until 1987, and 444 cubic inches (7.3 L), which was used in Ford trucks from 1988 until 1994 (naturally aspirated) and in 1993 and 1994 (turbocharged).
Displacement was 196 cubic inches (3.2 L). [2] In 1915 a new L-head water-cooled 201 cubic inches (3.3 L) inline-four engine appeared. [ 3 ] While International's own engines underwent constant developments, the pace of truck production in the twenties was such that others' engines (from Waukesha , Buda , and Lycoming for instance) had to be ...
6.8 L (415.0 cu in) 7.3 L (444.9 cu in) [1] [2] Cylinder bore: 4.22 in (107.2 mm) [1] [3] Piston stroke: 3.68 in (93.5 mm) 3.976 in (101.0 mm) [1] [3] Cylinder block material: Cast iron [3] Cylinder head material: Aluminum [3] Valvetrain: OHV (2 valves × cyl.) [1] [3] [4] [2] Compression ratio: 10.8:1 10.5:1 [3] Combustion; Fuel system: MPFI ...
2017–2021 1.2 L Dragon Ti-VCT I3, naturally aspirated. Based from 1.5 L Dragon engine but with smaller piston and without balancer shaft. [2]Displacement: 1194 cc
Three displacements were available during production: 401 cu in (6.6 L), 477 cu in (7.8 L) and 534 cu in (8.8 L); but however large, the 534 was very much smaller than the 1,100-cubic-inch (18.0 L) Ford GAA all aluminum 32 valve DOHC V8 (introduced during WW2), which was the largest displacement gasoline engine ever mass-produced by Ford Motor ...
The smallest-displacement engine of the 385 engine family, the 370 was introduced in 1977, replacing the 361 cu in (5.9 L) 360 Truck (FT) V8. Sharing its 3.59-inch stroke with the 429, the 370 was designed with a downsized 4.05-inch bore (shared with its predecessor and the 390 V8). For 1979, the engine was rebranded in metric, as 6.1 L. [2]
360 cu in (5.9 L) V8 in a Li'l Red Express Truck. The LA 360 cu in (5.9 L) has a bore and stroke of 4 in × 3.58 in (101.6 mm × 90.9 mm). It was released in 1971 with a two-barrel carburetor. The 360 used the large intake port 340 heads with a smaller intake valve of 1.88 in (48 mm).
The third-generation engine, introduced on the 2003 Viper, had a displacement of 8,285 cc (8.3 L; 505.6 cu in) with a bore x stroke of 102.4 mm × 100.6 mm (4.03 in × 3.96 in), rated at 510 hp (517 PS; 380 kW) at 5600 rpm and 535 lb⋅ft (725 N⋅m) at 4200 rpm of torque after SAE certification in 2006.