Search results
Results From The WOW.Com Content Network
The board foot or board-foot is a unit of measurement for the volume of lumber in the United States and Canada. [1] It equals the volume of a board that is one foot (30.5 cm) in length, one foot in width, and one inch (2.54 cm) in thickness, or exactly 2.359 737 216 liters .
In 1971 "Micro=Lam LVL" was introduced. "Micro=Lam LVL" consisted of laminated veneer lumber billets 4 feet (1.2 m) wide, 3 + 1 ⁄ 2 inches (89 mm) thick, and 80 feet (24 m) long. Troutner proved the structural capabilities of his Micro=Lam product by building a house in Hagerman, Idaho, using beams made of Micro=Lam.
Re-sawing is the splitting of 1-to-12-inch (25–305 mm) hardwood or softwood lumber into two or more thinner pieces of full-length boards. For example, splitting a 10-foot-long (3.0 m) 2×4 (1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 in or 38 by 89 mm) into two 1×4s (3 ⁄ 4 by 3 + 1 ⁄ 2 in or 19 by 89 mm) of the same length is considered re-sawing.
In the United States, planks can be any length and are generally a minimum of 2×8 (1 + 1 ⁄ 2 in × 7 + 1 ⁄ 4 in or 38 mm × 184 mm), but planks that are 2×10 (1 + 1 ⁄ 2 in × 9 + 1 ⁄ 4 in or 38 mm × 235 mm) and 2×12 (1 + 1 ⁄ 2 in × 11 + 1 ⁄ 4 in or 38 mm × 286 mm) are more commonly stocked by lumber retailers.
Studs usually consist of 1 + 1 ⁄ 2-by-3 + 1 ⁄ 2-inch (38 mm × 89 mm) or 1 + 1 ⁄ 2-by-5 + 1 ⁄ 2-inch (38 mm × 140 mm) lumber and are commonly spaced at 16 inches (410 mm) on center. This spacing may be changed to 12 or 24 inches (300 or 610 mm) on center depending on the load and the limitations imposed by the type and thickness of the ...
Lumber’s price drop has been particularly dramatic in just the last 90 days in the futures market, with contract prices for July falling 28% to $466 per thousand board feet (futures prices are ...
The beams are continuously formed, so the length of the beam is limited only to the maximum length that can be handled and transported. Typical widths are 3 + 1 ⁄ 2, 5 + 1 ⁄ 4 or 7 inches (89, 133 or 178 mm); typical depths are 9 + 1 ⁄ 2, 11 + 7 ⁄ 8, 14, 16 and 18 inches (240, 300, 360, 410 and 460 mm). Typically the beams are made to a ...
Lumber refers to smaller dimension or dressed lumber such as 2x4 or 2x6 used in modern construction. Interestingly a sawmill refers to the first machine to cut the lumber, whereas, in modern trade usage, "milled" lumber is further dressed by planing to standard dimensions, or made into molding or specialized forms for cabinet making.