Ad
related to: 3 inch to mm
Search results
Results From The WOW.Com Content Network
Nominal Pipe Size (NPS) is a North American set of standard sizes for pipes used for high or low pressures and temperatures. [1] " Nominal" refers to pipe in non-specific terms and identifies the diameter of the hole with a non-dimensional number (for example – 2-inch nominal steel pipe" consists of many varieties of steel pipe with the only criterion being a 2.375-inch (60.3 mm) outside ...
The single mount was to be exchanged for a twin 40 mm antiaircraft gun mount, and the twin 3-inch/50 for a quadruple 40 mm mount, on Essex-class aircraft carriers, and Allen M. Sumner and Gearing-class destroyers. Although intended as a one-for-one replacement for the 40 mm mounts, the new 3-inch (76 mm) mounts were heavier than expected, and ...
76.2 mm 3 inch Ordnance QF 17- pounder: Anti-tank gun 76.2 mm 3 inch Ordnance QF 18- pounder: Field gun 83.8 mm 3.3 inch Ordnance QF 20-pounder: Tank gun 83.8 mm 3.3 inch Ordnance QF 25-pounder: Gun-howitzer 87.6 mm 3.45 inch Ordnance QF 32-pounder: Tank gun 94 mm 3.7 inch Ordnance QF 60-pounder: Heavy field gun 127 mm 5 inch
Before the adoption of the metric system, several European countries had customary units whose name translates into "inch". The French pouce measured roughly 27.0 mm, at least when applied to describe the calibre of artillery pieces. The Amsterdam foot (voet) consisted of 11 Amsterdam inches (duim). The Amsterdam foot is about 8% shorter than ...
Schematic of a machine tap. Below is a comprehensive drill and tap size chart for all drills and taps: Inch, imperial, and metric, up to 36.5 millimetres (1.44 in) in diameter.
The 3-inch gun M5 was an anti-tank gun developed in the United States during World War II. The gun combined a 3-inch (76.2 mm) barrel of the anti-aircraft gun T9 and elements of the 105 mm howitzer M2. The M5 was issued exclusively to the US Army tank destroyer battalions starting in 1943.
Second World War-era capital ships had four classes of artillery: the heavy main battery, intended to engage opposing battleships and cruisers of 305 mm to 457 mm (12 inch to 18 inch); a secondary battery for use against enemy destroyers of 152 mm to 203 mm (6 inch to 8 inch); heavy anti-aircraft guns of 76 mm to 127 mm (3 inch to 5 inch), which could create barrages to knock out airplanes at ...
In the modern standard metric version, it is simply a size number, where listed diameter size is the major outer diameter of the external thread. For a taper thread, it is the diameter at the "gauge length" (plus/minus one thread pitch) from the small end of the thread.