Ad
related to: violin sound and tone board
Search results
Results From The WOW.Com Content Network
A sharp resonance response from the body of a cello (and occasionally a viola or a violin) produces a wolf tone, an unsatisfactory sound that repeatedly appears and disappears. A correctly positioned suppressor can remove the tone by reducing the resonance at that frequency, without dampening the sound of the instrument at other frequencies. [69]
Through this process, an alternating series of compression and rarefaction pulses travel away from the soundboard, creating sound waves. [5] The soundboard operates by the principle of forced vibration. The string gently vibrates the board, and despite their differences in size and composition, makes the board vibrate at exactly the same frequency.
A sound hole is an opening in the body of a stringed musical instrument, usually the upper sound board. Sound holes have different shapes: Round in flat-top guitars and traditional bowl-back mandolins; F-holes in instruments from the violin family, archtop mandolins and in archtop guitars; C-holes in viola da gambas and occasionally double ...
A violin consists of a body or corpus, a neck, a finger board, a bridge, a soundpost, four strings, and various fittings.The fittings are the tuning pegs, tailpiece and tailgut, endpin, possibly one or more fine tuners on the tailpiece, and in the modern style of playing, usually a chinrest, either attached with the cup directly over the tailpiece or to the left of it.
Attaching a small rubber, wooden, or metal device called a "mute" to the bridge of the violin alters the tone, softening the instrument's sound by adding mass to the bridge and therefore reducing its ability to vibrate freely, decreasing volume and giving a more mellow tone, with fewer audible overtones. In performances, it may give a desired ...
In a string instrument, the sound post or soundpost is a dowel inside the instrument under the treble end of the bridge, spanning the space between the top and back plates and held in place by friction. It serves as a structural support for an archtop instrument, transfers sound from the top plate to the back plate and alters the tone of the ...
On a cello, the strings are attached to the tailpiece and are held above the soundboard by the bridge.. A bridge is a device that supports the strings on a stringed musical instrument and transmits the vibration of those strings to another structural component of the instrument—typically a soundboard, such as the top of a guitar or violin—which transfers the sound to the surrounding air.
The distinctive sound of an instrument with a sound box owes a lot to the alteration made to the tone. A sound box is found in most string instruments. [2] The most notable exceptions are some electrically amplified instruments like the solid body electric guitar or the electric violin, and the piano which uses only a sound board instead.