Ads
related to: 12 volt to 3.3 converter adapter
Search results
Results From The WOW.Com Content Network
Voltage converters can be used in vehicles with 12 V DC outlets. A simple voltage dropper can be used to reduce the voltage for low-power devices; if more than 12V is required, or for high-powered devices, a switched-mode power supply is used.
A voltage regulator module (VRM), sometimes called processor power module (PPM), is a buck converter that provides the microprocessor and chipset the appropriate supply voltage, converting +3.3 V, +5 V or +12 V to lower voltages required by the devices, allowing devices with different supply voltages be mounted on the same motherboard.
Sometimes, the topology can be changed simply by re-labeling the connections. A 12 V input, 5 V output buck converter can be converted to a 7 V input, −5 V output buck–boost by grounding the output and taking the output from the ground pin. Likewise, SEPIC and Zeta converters are both minor rearrangements of the Ćuk converter.
This is a unique-looking barrel connector, apparently intended for providing a DC output jack (most DC jacks are used for power input).. Possibly available in multiple voltage ranges, the one for voltage classification 2 (3.15 to 6.3 V) has an outside diameter of 4.75 mm and a protruding pin of 2.5 mm diameter.
4.3.3.1 ATX12V 2.0. ... Standing for ATX 12-volt-only, ... Adapters do exist but power drain on the 12 V rail must be checked very carefully. There is a chance it can ...
Motor–generators can convert between any combination of DC and AC voltage and phase standards. Large motor–generator sets were widely used to convert industrial amounts of power while smaller units were used to convert battery power (6, 12 or 24 V DC) to a high DC voltage, which was required to operate vacuum tube (thermionic valve) equipment.
Ad
related to: 12 volt to 3.3 converter adapter