Ads
related to: line level to rca adapter
Search results
Results From The WOW.Com Content Network
Voltage vs. time of sine waves at reference and line levels, with V RMS, V PK, and V PP marked for the +4dBu line level. A line level describes a line's nominal signal level as a ratio, expressed in decibels, against a standard reference voltage. The nominal level and the reference voltage against which it is expressed depend on the line level ...
The RCA connector [3] is a type of electrical connector commonly used to carry audio and video signals. The name RCA derives from the company Radio Corporation of America, which introduced the design in the 1930s. [4] The connector’s male plug and female jack are called RCA plug and RCA jack. It is also called RCA phono connector [5] or phono ...
RCA Plugs for composite video (yellow) and stereo audio (white and red) RCA connectors , also known as phono connectors or phono plugs , are used for analog or digital audio or analog video. These were first used inside pre–World War II radio-phonographs to connect the turntable pickup to the radio chassis.
RCA or BNC: TOSLINK: Output level 2–7 V peak to peak 1.0–1.2 V peak to peak 0.5–0.6 V peak to peak — Min. input level 0.2 V 0.32 V 0.2 V — Max. distance 1000 m 100 m 10 m Modulation Biphase mark code: Subcode information ASCII id. text SCMS copy protection info. Audio bit depth: 24 bits 20 bits (24 bits, optionally) [citation needed]
In a typical home stereo system, this connection will be analog and unbalanced at consumer line-level of -10dBV using RCA connectors. By selecting the proper input on the receiver, the signal is routed internally to an amplifier which boosts the signal voltage from line-level to the voltage required by the speakers.
Phono input is a set of input jacks, usually mini jacks or RCA connectors, located on the rear panel of a preamp, mixer or amplifier, especially on early radio sets, to which a phonograph or turntable is attached. [1] Modern phono cartridges give a very low level output signal of the order of a few millivolts which the circuitry amplifies and ...