Search results
Results From The WOW.Com Content Network
For the purpose of manageability, this list is limited to production cars that have at least 600 kilowatts. Car models with higher-powered variants are listed only in their most powerful incarnation (for example, the Agera RS would be listed in place of the standard Agera, although the Agera makes over 600 kW).
360 cc (22 cu in) 2-stroke, 64 mm × 56 mm (2.52 in × 2.20 in) bore/stroke. This prototype produced 25 bhp (19 kW) at 6000 rpm. It was fitted to a rear-engined prototype (also named FC) in 1961, as part of the development work for the LC10 Fronte.
Diesel engine (naturally aspirated) – 33.4 kW (45.4 PS; 44.8 hp) per litre – 1993 Mercedes E 300 diesel 100 kW (136 PS; 134 hp) DIN 2.996 L OM606 I6 Diesel engine (forced-induction) – 100 kW (136.0 PS; 134.1 hp) per litre – 2020 BMW Alpina D5 S 3.0 L I6 triturbo 300 kW (408 PS; 402 hp) [ 32 ]
The TE50 and TL50 models were equipped with a 200 kW (270 hp) version, whilst the TS50 gained aluminium cylinder heads, a larger throttle body and a revised camshaft to produce 220 kW (300 hp). [22] The TE50 was available with a 5-speed manual or optional 4-speed automatic transmission.
It was chosen to base the engine on the 270T instead of the 310T due to the increased compression ratio. The engine yet again employs Ford's over-boost feature, which when the correct conditions are met will increase engine output to 370 kW and 650 Nm. [10] Power: 325 kW (436 hp) at 6000 rpm Torque: 576 N⋅m (425 lb⋅ft) at 2750 rpm
FPV named this uniquely tuned engine as the Boss 290 because of its power output. It produced 290 kW (394 PS; 389 bhp) at 5,500 rpm and 520 N·m (380 lb·ft) of torque at 4,500 rpm. Boss 302. For the BFII FPV GT Cobra special edition, the Boss 302 was created. The GT Cobra motor produced 405 hp (302 kW) and 398 lb·ft (540 N·m)).
A sectioned illustration of the Austin A40's 1200cc engine – the direct predecessor to the B series. The precursor of the "B" series engine was a 1200 cc Overhead Valve (OHV) engine which was used in the 1947-1952 Austin A40 Devon, and, in slightly modified form, in the 1953 Austin A40 Somerset.
The standard FG Falcon engine is a 24-valve 4.0-Litre in-line six with VCT; which produces peak power of 195 kW (261 hp) at 6000 rpm and [3] peak torque of 391 N⋅m (288 lb⋅ft) at 3250 rpm on regular 91 octane fuels. This power output raises up to 210 kW and 422 N⋅m with 98 octane fuels.