Ad
related to: forged internals for 4.6 2v fuel cell power point
Search results
Results From The WOW.Com Content Network
The Ford Modular engine is an overhead camshaft (OHC) V8 and V10 gasoline-powered small block engine family introduced by Ford Motor Company in 1990 for the 1991 model year. . The term “modular” applied to the setup of tooling and casting stations in the Windsor and Romeo engine manufacturing plants, not the engine its
electronic single-point fuel injection (SPI) and Bosch Mono-Jetronic engine control unit, later multi-point electronic indirect fuel injection with four intake manifold-sited fuel injectors (MPI) DIN-rated motive power & torque outputs 44 kW (60 PS; 59 bhp) at 5,200 rpm; 107 N⋅m (79 lbf⋅ft) at 2,400–2,800 rpm
The 6.2 L (379 cu in) V8 is the main variant of the Boss engine. The V8 shares design similarities with the Modular Engine family such as a deep-skirt block with cross-bolted main caps, crankshaft-driven gerotor oil pump, overhead cam valve train arrangement, and bellhousing bolt pattern.
The smallest-displacement engine of the 385 engine family, the 370 was introduced after the 429 and 460, replacing the 361 cu in (5.9 L) 360 Truck (FT) V8 in 1977. . Sharing its 3.59-inch stroke with the 429, the 370 was designed with a downsized 4.05-inch bore (shared with its predecessor and the 3
Power for the base engine was up to 315 hp (235 kW), even though compression was down a quarter point, to 9.75:1. [ 9 ] The 394 replaced the 371 in Super 88 and 98 cars for 1959 and 1960 and a detuned version was used in the 88 for 1961 and the Dynamic 88 for 1962-1964.
The Ford Boss 302 (formally the "302 H.O.") is a high-performance "small block" 302 cu in (4.9 L) V8 engine manufactured by Ford Motor Company.The original version of this engine was used in the 1969 and 1970 Boss 302 Mustangs and Cougar Eliminators and was constructed by attaching heads designed for the planned 351 Cleveland (which debuted the following year) to a Ford small block. [1]
Crankshaft: Forged; Knock sensors from the Ford Boss engine; Siamesed cylinders with saw cuts between cylinders to increase cooling capacity; Variable oil pump for fuel economy [7] Because the engine uses overhead valves actuated by pushrods, it is smaller than many of the overhead camshaft Ford Modular engines, and can be fitted to older cars. [7]
A hemispherical head ("hemi-head") gives an efficient combustion chamber with minimal heat loss to the head, and allows for two large valves.However, a hemi-head usually allows no more than two valves per cylinder due to the difficulty in arranging the valve gear for four valves at diverging angles, and these large valves are necessarily heavier than those in a multi-valve engine of similar ...