Search results
Results From The WOW.Com Content Network
Video demonstration of high-speed flash photography. A flash is a device used in photography that produces a brief burst of light (lasting around 1 ⁄ 200 of a second) at a color temperature of about 5500 K [1] [citation needed] to help illuminate a scene. The main purpose of a flash is to illuminate a dark scene.
Either the flash is firing too late or the shutter speed is too fast (shutter moving vertically). Note the different exposure levels. In photography, flash synchronization or flash sync is the synchronizing the firing of a photographic flash with the opening of the shutter admitting light to photographic film or electronic image sensor. PC-socket
In cinematography and photography, flashing is the exposure of the film or digital sensors to uniform light prior to exposing them to the scene. [ 1 ] [ 2 ] It is used as a method of contrast control to bring out detail in darker areas.
The f-number (relative aperture) determines the depth of field, and the shutter speed (exposure time) determines the amount of motion blur, as illustrated by the two images at the right (and at long exposure times, as a second-order effect, the light-sensitive medium may exhibit reciprocity failure, which is a change of light sensitivity ...
The baseline for what seems "normal" in lighting is often the direction and character of natural and artificial light as well as the context provided by other clues. In the picture above, the photographer added a warming gel on the flash of the woman standing in a field in late afternoon light. The viewer knows the time of day from the angle of ...
Calculations of DOF assume that an imperfectly focused "circle of confusion" smaller than 0.20 to 0.25 mm is indistinguishable from perfect focus in an image viewed from a normal distance. [7] [12] This is approximately equivalent to 0.03 mm in the case of an image on 35 mm film or FF format. [13] DPI: Dots per inch. A measure of the ability of ...
The commander unit usually controls the remote flashes by using flashes of visible or infrared light, although TTL-capable radio triggering systems are available. The photographer can normally vary the light ratios between the different flashes. The technique of using preflashes to get a proper exposure is still used in automatic flash modes.
The short-term flicker indicator P st LM is implemented in a light flickermeter which processes the light measured by means of a light sensor. The light flickermeter [ 14 ] [ 15 ] consists of four processing blocks which include weighting filters to account for frequency dependency of the visibility of TLMs as well as statistical processing to ...