Search results
Results From The WOW.Com Content Network
Micro drive is a type of bicycle drivetrain, mostly BMX and MTB, that uses smaller than standard-sized sprockets. [1] The smallest rear sprocket that fits on a freehub body is a 10 or 11-tooth, but with the use of a cassette hub, sometimes called a micro drive rear hub, sprockets as small as 8 teeth may be used.
With respect to the stock gearing on a motorcycle, installing a smaller counter-shaft sprocket (fewer teeth), or a larger rear sprocket (more teeth), produces a lower gear ratio, which increases the acceleration of the motorcycle but decreases its top speed. Installing a larger counter-shaft sprocket, or a smaller rear sprocket, produces a ...
A freewheel (also known as a block) consists of either a single sprocket or a set of sprockets mounted on a body which contains an internal ratcheting mechanism and mounts on a threaded hub. Threaded rear hubs were available in different thread patterns depending on the country of manufacture, French and British threads being the most common.
There are two chainrings whose relative difference (say 10%) is about half the relative step on the cogset (say 20%). This was used in the mid-20th century when front derailleurs could only handle a small step between chainrings and when rear cogsets only had a small number of sprockets, e.g. chainrings 44-48 and cogset 14-17-20-24-28.
A larger rear sprocket was fitted (from 41 to 42 teeth). New exhaust system. The disk brakes were changed with a larger diameter 320 mm (13 in) front brake discs but thinner at 4.5 mm (0.18 in) as well as a larger 220 mm (8.7 in) rear brake discs but thinner at 4.5 mm (0.18 in) Along with a smaller, lighter rear caliper.
The rear derailleur has two functions: it moves the chain between rear sprockets while taking up chain slack caused by moving to a smaller sprocket at the rear or a smaller chainring by the front derailleur. In order to accomplish this second task, it is positioned in the path of the bottom, slack portion of chain.
For a toothed belt drive, the number of teeth on the sprocket can be used. For friction belt drives the pitch radius of the input and output pulleys must be used. The mechanical advantage of a pair of a chain drive or toothed belt drive with an input sprocket with N A teeth and the output sprocket has N B teeth is given by
A chain drive and rear derailleur gear change, the most popular system in use today A shaft-drive with crankset and rear gear hub. Bicycle drivetrain systems are used to transmit power on bicycles, tricycles, quadracycles, unicycles, or other human-powered vehicles from the riders to the drive wheels.