Search results
Results From The WOW.Com Content Network
The amount of mass that can be lifted by hydrogen in air per unit volume at sea level, equal to the density difference between hydrogen and air, is: (1.292 - 0.090) kg/m 3 = 1.202 kg/m 3. and the buoyant force for one m 3 of hydrogen in air at sea level is: 1 m 3 × 1.202 kg/m 3 × 9.8 N/kg= 11.8 N
Air is the most common source and reservoir of oxygen, ... (2080 liters) or 2.99 kg of oxygen which would occupy 2.62 liters if it was liquid. [2]
At IUPAC standard temperature and pressure (0 °C and 100 kPa), dry air has a density of approximately 1.2754 kg/m 3. At 20 °C and 101.325 kPa, dry air has a density of 1.2041 kg/m 3. At 70 °F and 14.696 psi, dry air has a density of 0.074887 lb/ft 3.
Liquid oxygen has a clear cyan color and is strongly paramagnetic: it can be suspended between the poles of a powerful horseshoe magnet. [2] Liquid oxygen has a density of 1.141 kg/L (1.141 g/ml), slightly denser than liquid water, and is cryogenic with a freezing point of 54.36 K (−218.79 °C; −361.82 °F) and a boiling point of 90.19 K (−182.96 °C; −297.33 °F) at 1 bar (14.5 psi).
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span ±10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 BTU/lb. [2] A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
Liquid hydrogen (H 2 (l)) is the liquid state of the element hydrogen. Hydrogen is found naturally in the molecular H 2 form. [4] To exist as a liquid, H 2 must be cooled below its critical point of 33 K. However, for it to be in a fully liquid state at atmospheric pressure, H 2 needs to be cooled to 20.28 K (−252.87 °C; −423.17 °F). [5]
The number of pounds "is simply not a measurement of what goes in and out of the body," Agyeman notes. Okay, so tell me more about weight loss versus de-bloating.
Many gases can be put into a liquid state at normal atmospheric pressure by simple cooling; a few, such as carbon dioxide, require pressurization as well. Liquefaction is used for analyzing the fundamental properties of gas molecules (intermolecular forces), or for the storage of gases, for example: LPG , and in refrigeration and air conditioning .