Ads
related to: removing rivets with a drill set
Search results
Results From The WOW.Com Content Network
[4]: p.81 There are two methods to removing rivets: the 'cut' and 'pull'. The 'cut' method consists of cutting the rivets through the middle with a file and then pulled out. The 'pull' method involves placing a thin blade under the rivet and pushing out any plaster packing. This method uses leverage to pull the rivet from the ceramic piece.
The holes being aligned, a rivet is passed through the holes and permanent heads are formed onto the ends of the rivet utilizing hammers and forming dies (by either cold working or hot working). Rivets are commonly purchased with one head already formed. When it is necessary to remove rivets, one of the rivet's heads is sheared off with a cold ...
There are also non-precision reamers which are used for more basic enlargement of holes or for removing burrs. The process of enlarging the hole is called reaming. There are many different types of reamer and they may be designed for use as a hand tool or in a machine tool, such as a milling machine or drill press.
The screw is drilled out with the appropriate drill and drill bushing. The extractor is then hammered into the hole with a brass hammer, because a steel hammer is more likely to cause the extractor to break. The appropriate special nut is then attached to the end of the extractor. The nuts can then be turned with a wrench to remove the screw. [1]
The other new device, hitting at twice or three times the speed of the rivet gun, was the stone carver's hammer – a great blessing for smooth and rapid dressing of granite and marble. In 1930 F.J. Hauschild adapted the original stone carver's hammer into a portable hand-held steel tube frame for the purpose of straightening auto bodies.
A countersink may also be used to remove the burr left from a drilling or tapping operation, thereby improving the finish of the product and removing any hazardous sharp edges. [ 1 ] The basic geometry of a countersink (cutter) inherently can be applied to the plunging applications described above (axial feed only) and also to other milling ...