Ads
related to: underground sprinkler wire home depot 25 ft tape measure with 3 inch case
Search results
Results From The WOW.Com Content Network
This fitting is used with 1 ⁄ 2-inch, 5 ⁄ 8-inch, and 3 ⁄ 4-inch hoses. [4] [5] In other countries, a British Standard Pipe (BSP) thread is used, which is 3 ⁄ 4 inch (19 mm) and 14 TPI (male part outside diameter is 26.441 mm or 1.04 in). The GHT and BSP standards are not compatible, and attempting to connect a GHT hose to a BSP fitting ...
Detectable tape or Underground warning tape is a conductive tape typically applied over buried utilities made of non-conductive materials such as plastic, fiberglass, or cement. It is used because most utility location methods work best on conductive objects, and hence may easily miss structures made of non-conductive materials.
The first use of sprinklers by farmers was some form of home and golf course type sprinklers. These ad hoc systems, while doing the job of the buried pipes and fixed sprinkler heads, interfered with cultivation and were expensive to maintain. Center-pivot irrigation was invented in 1940 [3] by farmer Frank Zybach, who lived in Strasburg ...
Tape measures are often designed for specific uses or trades. Tapes may have different scales, be made of different materials, and be of different lengths depending on the intended use. Tape measures used in tailoring are called "sewing tape". Originally made from flexible cloth or plastic, fiberglass is now the preferred material due to its ...
In 2008, the installed costs of sprinkler systems ranged from US$0.31 – $3.66 per square foot, depending on type and location. Residential systems, installed at the time of initial home construction and utilizing municipal water supplies, average about US$0.35/square foot. [22] Systems can be installed during initial construction, or retrofitted.
In both those instances the white wire should be identified as being hot, usually with black tape inside junction boxes. The neutral wire is identified by gray or white insulated wire, perhaps using stripes or markings. With lamp cord wire the ribbed wire is the neutral, and the smooth wire is the hot. NEC 2008 400.22(f) allows surface marking ...