Ads
related to: best impedance for speakers to hear sound music production
Search results
Results From The WOW.Com Content Network
The electrical impedance of the speaker varies with the back EMF and thus with the applied frequency. The impedance is at its maximum at F s , shown as Z max in the graph. For frequencies just below resonance, the impedance rises rapidly as the frequency increases towards F s and is inductive in nature.
A loudspeaker with an 8Ω nominal impedance may exhibit actual impedances ranging from approximately 5 to 100Ω depending on frequency. In this context, the nominal wattage is the theoretical electric power that would be transferred from amplifier to speaker if the loudspeaker was actually exhibiting its nominal impedance. The actual electric ...
A speaker with a higher impedance may have lower measured sensitivity and thus appear to be less efficient than a speaker with a lower impedance even though their efficiencies are actually similar. Speaker efficiency is a metric that only measures the actual percentage of electrical power that the speaker converts to acoustic power and is ...
A lower damping factor helps to enhance the bass response of the loudspeaker by several decibels (where the impedance of the speaker would be at its maximum), which is useful if only a single speaker is used for the entire audio range. Therefore, some amplifiers, in particular vintage amplifiers from the 1950s, 1960s and 1970s, feature controls ...
The 1925 paper [1] of Chester W. Rice and Edward W. Kellogg, fueled by advances in radio and electronics, increased interest in direct radiator loudspeakers. In 1930, A. J. Thuras of Bell Labs patented (US Patent No. 1869178) his "Sound Translating Device" (essentially a vented box) which was evidence of the interest in many types of enclosure design at the time.
A high-impedance part of the instrument, such as a string, transmits vibrations through a bridge (intermediate impedance) to a sound board (lower impedance). The soundboard then moves the still lower-impedance air. Without bridge and soundboard, the instrument does not transmit enough sound to the air, and is too quiet to be performed with.