Ad
related to: tuning a duplexer for frequencies 2 meter cable price
Search results
Results From The WOW.Com Content Network
In the case of input and output frequencies in the United States, for example: Amateur repeaters in the 144–148 MHz band usually use a 600 kHz (0.6 MHz) separation, in the 1.25-meter band use a 1.6 MHz separation, in the 420–450 MHz band use a 5 MHz separation, and in the 902–928 MHz band use a 25 MHz separation.
These are effectively a higher-performance version of a diplexer, typically with a narrow split between the two frequencies in question (typically around 2%-5% for a commercial two-way radio system). With a duplexer the high- and low-frequency signals are traveling in opposite directions at the shared port of the duplexer.
The diplexer is useful in homes that are already wired with one cable, because it eliminates the need to install a second cable. For the diplexer to work, the existing cable must be able to pass the satellite frequencies with little loss. Older TV installations may use a solid dielectric RG-59 cable, and that cable may be inadequate. [1]
Repeaters are found mainly in the VHF 6-meter (50–54 MHz), 2-meter (144–148 MHz), 1.25-meter band (1 1 ⁄ 4 meters) (220–225 MHz) and the UHF 70 centimeter (420–450 MHz) bands, but can be used on almost any frequency pair above 28 MHz. In some areas, 33 centimeters (902–928 MHz) and 23 centimeters (1.24–1.3 GHz) are also used for ...
A duplex communication system is a point-to-point system composed of two or more connected parties or devices that can communicate with one another in both directions. Duplex systems are employed in many communications networks, either to allow for simultaneous communication in both directions between two connected parties or to provide a reverse path for the monitoring and remote adjustment ...
Transformers, autotransformers, and baluns are sometimes incorporated into the design of narrow band antenna tuners and antenna cabling connections. They will all usually have little effect on the resonant frequency of either the antenna or the narrow band transmitter circuits, but can widen the range of impedances that the antenna tuner can match, and/or convert between balanced and ...
In 2007 a team led by Marin Soljačić at MIT used two coupled tuned circuits each made of a 25 cm self-resonant coil of wire at 10 MHz to achieve the transmission of 60 W of power over a distance of 2 meters (6.6 ft) (8 times the coil diameter) at around 40% efficiency. [57] [67] [78] [35] [84]
The recent growth in user-generated content calls for more upstream capacity. Cable Labs developed the Full Duplex DOCSIS 3.1 standard to enable symmetrical service at speeds up to 10 Gbit/s in each direction. In DOCSIS 3.1, different frequencies are allocated for upstream and downstream transmissions, separated by a guard band.