Ad
related to: ford 4.6 spark plug problems
Search results
Results From The WOW.Com Content Network
3-valve 5.4 L and 6.8 L engines built before 10/9/07 and 3-valve 4.6 Ls built before 11/30/07 found in many 2004–2008 Ford, Lincoln, and Mercury vehicles have an issue with difficult-to-remove spark plugs, which can cause part of the spark plug to become seized in the cylinder head.
Ford developed a supercharged version of the 3.8 L Essex V6 that was used in two Ford MN12 platform cars beginning in the late 1980s. A belt driven Eaton M90 roots-type supercharger spinning at 2.6 times engine rpm, to a maximum of 15,000 rpm at the engine's 6000 rpm redline, provided up to 12 psi (0.83 bar) of boost. [ 7 ]
Ford was also having problems meeting demand for its 2.3 L OHC engine, which was used in a multitude of models worldwide. In anticipation of another engine shortage, the Ford engine plant in Lima, Ohio, which was already producing the 2.3-liter OHC engine, decided they could modify the Falcon inline six block casting molds to remove cylinders 4 ...
Misfires have also been reported, as leaking anti-freeze may seep down into the spark plug wells. [22] This resulted in a class action lawsuit against Ford. [ 23 ] Beginning in 2003, a revised intake manifold with a bolt-on aluminum thermostat housing and anti-freeze crossover was produced and fitted to all new vehicles in an attempt to remedy ...
The Ford Cologne V6 is a series of 60° cast iron block V6 engines produced by the Ford Motor Company from 1962 to 2011 in displacements between 1.8 L; 110.6 cu in (1,812 cc) and 4.0 L; 244.6 cu in (4,009 cc).
The EDIS-6 module is used on the following vehicles equipped with the 4.0L Ford Cologne V6 engine and 3.8L Ford Essex V6 engine between 1990 and 1997: Ford Ranger / Mazda B-Series; Ford Explorer / Mazda Navajo; Ford Aerostar; Ford Mustang (3.8L V6) Ford Thunderbird Supercoupe; Ford Taurus SHO V6 (1989–1995) Ford Windstar
The first (and ultimately only) modern Boss engine, a 6.2 L V8, was produced at the Ford Romeo Engine Plant in Romeo, Michigan, from 2010 to the plant's closure in December 2022. [2] Ford Australia and Ford Performance Vehicles used the "Boss" name for V8 engines from 2002, but these were variations of the Ford Modular V8 with locally produced ...
The head castings and valve head sizes from 1969 to 1976 were different, notably in passages for air injection and spark plug diameters (1969–1974 18 mm, 1975 and up 14 mm). From 1977 onward, the 351W shared the same head casting as the 302, differing only in bolt hole diameters (7/16 inch for the 302, 1/2 inch for the 351W).