Ads
related to: transmission leaking from torque converter box
Search results
Results From The WOW.Com Content Network
The Volkswagen 01M transmission is an electronic/hydraulic four-speed automatic transmission deployed in Cabrio, Jetta, Golf, GTI, New Beetle manufactured between 1995 through 2005, and transverse engine Passats manufactured between 1995 through 1997. This transmission was entirely engineered and most probably manufactured by the French company ...
ZF torque converter cut-away A cut-away model of a torque converter. A torque converter is a device, usually implemented as a type of fluid coupling, that transfers rotating power from a prime mover, like an internal combustion engine, to a rotating driven load. In a vehicle with an automatic transmission, the torque
This transmission, like single and dual range and dual coupling hydramatics, also has the feature of split torque in the transmission, whereby in fourth (or high) gear only 40% to 50% depending on transmission—40% in Roto's case—but because of the design the coupling is only required to carry 40% of the engine torque.
In the early 1950s, BorgWarner developed a series of three-speed torque converter automatics for car manufacturers such as American Motors, Ford and Studebaker. Chrysler was late in developing its own true automatic, introducing the two-speed torque converter PowerFlite in 1953, and the three-speed TorqueFlite in 1956. The latter was the first ...
The 5G-Tronic (model W5A 330 and W5A 580 · type 722.6) is an electronically shifted 5-speed overdrive automatic transmission with torque converter lock-up (typically in gears 3, 4 and 5) and 2-speed for reverse. In all applications this transmission is identified as the New Automatic Gearbox Generation One, or NAG1.
Due to its two-speed with torque converter design, the Super Turbine 300 is often confused with Chevrolet's Powerglide — which was also a two-speed torque converter transmission, but the ST 300 had a different design from the Chevy unit, which had been around since 1950. The low band was the same as the 1955 up PG along with the same style ...
The typical torque converter of the time was about 11.5in. long and the torque multiplication ratio was about 1.5 to 1. The N360/N600 torque converter was about 5.5in. long and achieved a torque multiplication of over 2.2 to 1. The first Civic was equipped with a manually changed hydraulically engaged two-speed transmission with a torque converter.
The 8HP 70 transmission with the gearset 4 in 23-85-teeth-configuration was the pilot series and therefore without generation designation. It was first used in the BMW 7 Series (F01) 760Li, has a torque handling limit of 700 N⋅m (516 lb⋅ft), and weighs 87 kg (192 lb).