Search results
Results From The WOW.Com Content Network
Insulators made from porcelain rich in alumina are used where high mechanical strength is a criterion. Porcelain has a dielectric strength of about 4–10 kV/mm. [8] Glass has a higher dielectric strength, but it attracts condensation and the thick irregular shapes needed for insulators are difficult to cast without internal strains. [9]
Aside from fuses, most conductors in the real world are operated far below this limit, however. For example, household wiring is usually insulated with PVC insulation that is only rated to operate to about 60 °C, therefore, the current in such wires must be limited so that it never heats the copper conductor above 60 °C, causing a risk of fire.
According to electronic band theory, solids can be classified as insulators, semiconductors, semimetals, or metals. In insulators and semiconductors the filled valence band is separated from an empty conduction band by a band gap. For insulators, the magnitude of the band gap is larger (e.g., > 4 eV) than that of a semiconductor (e.g., < 4 eV).
If a closed circuit consists of conductors of two different metals, and if one junction of the two metals is at a higher temperature than the other, an electromotive force is created in a specific polarity. An example of this is in the case of copper and iron, the electrons first flow along the iron from the hot junction to the cold one.
The most effective conductors are usually metals because they can be described fairly accurately by the free electron model in which electrons delocalize from the atomic nuclei, leaving positive ions surrounded by a cloud of free electrons. [24] Examples of good conductors include copper, aluminum, and silver. Wires in electronics are often ...
English scientist Stephen Gray made the distinction between insulators and conductors. 1745: German physicist Ewald Georg von Kleist and Dutch scientist Pieter van Musschenbroek invented Leyden jars. 1752: American scientist Benjamin Franklin showed that lightning was electrical by flying a kite and explained how Leyden jars work. 1780
The non-conductive region is called the dielectric or electrical insulator. Examples of traditional dielectric media are air, paper, and certain semiconductors. A capacitor is a self-contained system, isolated with no net electric charge. The conductors must hold equal and opposite charges on their facing surfaces. [1]
Undoped conjugated polymers are semiconductors or insulators. In such compounds, the energy gap can be > 2 eV, which is too great for thermally activated conduction. Therefore, undoped conjugated polymers, such as polythiophenes, polyacetylenes only have a low electrical conductivity of around 10 −10 to 10 −8 S/cm. Even at a very low level ...