Ads
related to: 80000 gpd to gpm transfer cable
Search results
Results From The WOW.Com Content Network
OC-12 is a network line with transmission speeds of up to 622.08 Mbit/s (payload: 601.344 Mbit/s; overhead: 20.736 Mbit/s).. OC-12 lines were commonly used by ISPs as wide area network (WAN) connections, or connecting xDSL customers to a larger internal network [3]
The channel capacity depends on the physical and electrical properties of the cable, while the wire speed also depends on the connection protocols. The wire speed may also refer to maximum throughput , which typically is a couple of percent lower than the physical layer net bit rate in wired networks due to data-link-layer protocol overhead ...
The maximum goodput (for example, the file transfer rate) may be even lower due to higher layer protocol overhead and data packet retransmissions caused by line noise or interference such as crosstalk, or lost packets in congested intermediate network nodes. All protocols lose something, and the more robust ones that deal resiliently with very ...
GPD [citation needed] ≡ 1 gal/d = 4.381 263 63 8 × 10 −8 m 3 /s gallon (US fluid) per hour GPH [citation needed] ≡ 1 gal/h = 1.051 503 27 3 × 10 −6 m 3 /s gallon (US fluid) per minute GPM [citation needed] ≡ 1 gal/min = 6.309 019 64 × 10 −5 m 3 /s: litre per minute l/min or L/min ≡ 1 L/min = 1. 6 × 10 −5 m 3 /s
Underground cable locations are not always obvious, which can lead to unwary diggers damaging cables or being electrocuted. Operations are more difficult since underground cables' high reactive power produces large charging currents, making voltage control more difficult. Large charging currents arise due to the higher capacitance from ...
Cables ≥ 52 kV are equipped with an extruded lead sheath to prevent water intrusion. No other materials have been accepted so far. The lead alloy is extruded onto the insulation in long lengths (over 50 km is possible). In this stage the product is called cable core. In single-core cables the core is surrounded by concentric armoring.
Serial cables are typically used for RS-232 communication. A serial cable or RS-232 cable is a cable used to transfer information between two devices using a serial communication protocol. The form of connectors depends on the particular serial port used. A cable wired for connecting two DTEs directly is known as a null modem cable.
Mineral-insulated copper-clad cable is a variety of electrical cable made from copper conductors inside a copper sheath, insulated by inorganic magnesium oxide powder. The name is often abbreviated to MICC or MI cable, and colloquially known as pyro (because the original manufacturer and vendor for this product in the UK was a company called ...