Search results
Results From The WOW.Com Content Network
The Serial Line Internet Protocol (SLIP) [1] [2] is an encapsulation of the Internet Protocol [a] designed to work over serial ports and router connections. It is documented in RFC 1055 . On personal computers, SLIP has largely been replaced by the Point-to-Point Protocol (PPP), which is better engineered, has more features, and does not ...
A Queued Serial Peripheral Interface (QSPI; different to but has same abbreviation as Quad SPI described in § Quad SPI) is a type of SPI controller that uses a data queue to transfer data across an SPI bus. [19]
The USART's synchronous capabilities were primarily intended to support synchronous protocols like IBM's synchronous transmit-receive (STR), binary synchronous communications (BSC), synchronous data link control (SDLC), and the ISO-standard high-level data link control (HDLC) synchronous link-layer protocols, which were used with synchronous voice-frequency modems.
Most serial communications designs send the data bits within each byte least significant bit first. Also possible, but rarely used, is most significant bit first; this was used, for example, by the IBM 2741 printing terminal. The order of bits is not usually configurable within the serial port interface but is defined by the host system.
A DB-25 connector as described in the RS-232 standard Data circuit-terminating equipment (DCE) and data terminal equipment (DTE) network. In telecommunications, RS-232 or Recommended Standard 232 [1] is a standard originally introduced in 1960 [2] for serial communication transmission of data.
Block diagram for a UART. A universal asynchronous receiver-transmitter (UART / ˈ juː ɑːr t /) is a peripheral device for asynchronous serial communication in which the data format and transmission speeds are configurable.
Serial computer buses have become more common even at shorter distances, as improved signal integrity and transmission speeds in newer serial technologies have begun to outweigh the parallel bus's advantage of simplicity (no need for serializer and deserializer, or SerDes) and to outstrip its disadvantages (clock skew, interconnect density).
Asynchronous start-stop is the lower data-link layer used to connect computers to modems for many dial-up Internet access applications, using a second (encapsulating) data link framing protocol such as PPP to create packets made up out of asynchronous serial characters. The most common physical layer interface used is RS-232D.