Ads
related to: phillips screwdriver size 1 1/2
Search results
Results From The WOW.Com Content Network
Screwdriver tips are generally designated by blade thickness × width in mm, e.g. 1.2 × 6.5 which roughly matches a classic North American 1 ⁄ 4-inch screwdriver although the North American one is often a bit thinner (≈1.0 mm).
Each Phillips screwdriver size also has a related shank diameter. The driver has a 57° point and tapered, unsharp (rounded) flutes. The #1 and smaller bits come to a blunt point, but the #2 and above have no point, but rather a nearly squared-off tip, making each size incompatible with the other.
The screw itself should be drilled a minimum of 1" into the concrete to hold effectively and a maximum of 1-3/4" or the threads will wear and will lose holding power. Ideally 1-1/4" to 1-1/2" of screw thread in the concrete. [1] So for example, if a 1/2" board is being screwed onto the concrete, a 1-3/4" to 2" concrete screw should be used ...
A Robertson screw, also known as a square screw [1] or Scrulox, [2] is a type of screw with a square-shaped socket in the screw head and a corresponding square protrusion on the tool. Both the tool and socket have a slight taper .
Drill points for the smallest 133/135 size screwdriver; adapters to adapt push drill size drill point sets to the three sizes of screwdriver chuck size; countersinks; screwdriver tips holding with screw holding feature; Phillips screwdriver tips in various sizes (Ph#1 to Ph#3 in 5/16" and 9/32" shank models, Ph#1 and Ph#2 sizes only for the 7/ ...
Phillips screw head. Henry Frank Phillips (June 4, 1889 – April 13, 1958) was an American businessman from Portland, Oregon. The Phillips-head ("crosshead") screw and screwdriver are named after him. [1] The importance of the crosshead screw design lies in its self-centering property, useful on automated production lines that use powered ...