Ads
related to: spark plugs not working properly
Search results
Results From The WOW.Com Content Network
Spark plug with single side electrode An electric spark on the spark plug. A spark plug (sometimes, in British English, a sparking plug, [1] and, colloquially, a plug) is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture by an electric spark, while containing combustion pressure within ...
In spark-ignition internal combustion engines, knocking (also knock, detonation, spark knock, pinging or pinking) occurs when combustion of some of the air/fuel mixture in the cylinder does not result from propagation of the flame front ignited by the spark plug, but when one or more pockets of air/fuel mixture explode outside the envelope of the normal combustion front.
Carbon deposits form a heat barrier and can be a contributing factor to pre-ignition. Other causes include: An overheated spark plug (too hot a heat range for the application). Glowing carbon deposits on a hot exhaust valve (which may mean the valve is running too hot because of poor seating, a weak valve spring or insufficient valve lash)
The contact breaker is operated by an engine-driven cam.On an engine with a distributor, the contact breaker can be found beneath the distributor cap.The position of the contact breaker is set so that it opens (and hence generates a spark) at exactly the optimum moment to ignite the fuel/air mixture.
Vintage engine testing equipment that can test ignition timing, ignition dwell, manifold vacuum and exhaust emissions. Engine tuning is the adjustment or modification of the internal combustion engine or Engine Control Unit (ECU) to yield optimal performance and increase the engine's power output, economy, or durability.
A variation coil-on-plug ignition has each coil handle two plugs, on cylinders which are 360 degrees out of phase (and therefore reach top dead center (TDC) at the same time); in the four-cycle engine this means that one plug will be sparking during the end of the exhaust stroke while the other fires at the usual time, a so-called "wasted spark ...
1. Always Inspect Lights Before Hanging Them. The first thing you should do before hanging the Christmas lights is to inspect the plugs, wires, and sockets for any problems.
Diesel engines do not use spark plugs to ignite the air fuel mixture and rely only on the heat generated by compression alone to ignite the fuel. In extremely low ambient temperature diesel fuel can gel which can completely stop the fuel from flowing.