Ads
related to: used spinnaker sail 10420 pro series trailer hitch weight distribution 10000 lbs
Search results
Results From The WOW.Com Content Network
A weight-distributing hitch is a "load leveling" hitch. It is a hitch setup mounted on the tow vehicle that uses spring bars and chains under tension to distribute part of the trailer's hitch weight from the towing vehicle's rear axle to the towing vehicle's front axle and to the trailer's axle(s). It can help reduce trailer sway and hop.
Code 2 is a medium air running sail, used for apparent wind angles over 90 degrees. Code 3 is a medium air reaching sail, used for apparent wind angles near 90 degrees. Code 4 is a heavy air running sail, used in the heaviest winds normally expected. Code 5 is a heavy air reaching sail, used in the heaviest winds normally expected.
The spinnaker pole is rigged to run from the base of the mast, [1] where there is a special fitting for attaching one end of the pole, out to windward over the side of the boat. There, one of the control lines of whichever sail it is to be used with is run through a fitting on the other end of the spinnaker pole. This allows for more precise ...
A jib, left, compared to a roughly 110% genoa, right. The foretriangle is outlined in red. The term jib is the generic term for any of an assortment of headsails.The term genoa (or genny) refers to a type of jib that is larger than 100% of the foretriangle, which is the triangular area formed by the point at which the stay intersects the mast, and deck or bowsprit, and the line where the mast ...
For this reason weight distribution varies with the vehicle's intended usage. For example, a drag car maximizes traction at the rear axle while countering the reactionary pitch-up torque. It generates this counter-torque by placing a small amount of counterweight at a great distance forward of the rear axle.
The total upwind sail area for the Mutt is 150 square feet (14 m 2). The main sail is 100 square feet (9.3 m 2), and the jib is 50 square feet (4.6 m 2) maximum. The Mutineer can also be rigged for a spinnaker. All Mutineers built since 2008 come rigged for a spinnaker from the factory. Sail area for the spinnaker is 166 square feet (15.4 m 2 ...