When.com Web Search

Search results

  1. Results From The WOW.Com Content Network
  2. Speeds and feeds - Wikipedia

    en.wikipedia.org/wiki/Speeds_and_feeds

    Cutting speed may be defined as the rate at the workpiece surface, irrespective of the machining operation used. A cutting speed for mild steel of 100 ft/min is the same whether it is the speed of the cutter passing over the workpiece, such as in a turning operation, or the speed of the cutter moving past a workpiece, such as in a milling operation.

  3. Tandem rolling mill - Wikipedia

    en.wikipedia.org/wiki/Tandem_rolling_mill

    Consequently Chart 2 was created from a similar coil, but with a screw-down position scale of 0.06mm per division; that is, from 5.8mm to 6.4mm. In the chart recordings, notice that the force (light green trace) has been held constant by the automatic control, which has raised the screw-downs (mauve trace) as the speed (red trace) has increased ...

  4. Speed nut - Wikipedia

    en.wikipedia.org/wiki/Speed_nut

    Most types are designed for either machine screws or sheet metal screws. Some nuts do not attach to the workpiece. These are usually shaped as either a rectangle, a flange nut, or a hex nut; the rectangular speed nut is also known as a flat-style speed nut. Speed nuts that attach to the workpiece usually are some form of a J-nut or U-nut. [2] [3]

  5. Mixing (process engineering) - Wikipedia

    en.wikipedia.org/wiki/Mixing_(process_engineering)

    Mixing of liquids occurs frequently in process engineering. The nature of liquids to blend determines the equipment used. Single-phase blending tends to involve low-shear, high-flow mixers to cause liquid engulfment, while multi-phase mixing generally requires the use of high-shear, low-flow mixers to create droplets of one liquid in laminar, turbulent or transitional flow regimes, depending ...

  6. Screw mechanism - Wikipedia

    en.wikipedia.org/wiki/Screw_mechanism

    Animation showing the operation of a screw. As the screw shaft rotates, the nut moves linearly along the shaft. This is a type called a lead screw. A machine used in schools to demonstrate the action of a screw, from 1912. It consists of a threaded shaft through a threaded hole in a stationary mount.

  7. Bolted joint - Wikipedia

    en.wikipedia.org/wiki/Bolted_joint

    A study of the effect of torquing two samples, one lubricated and the other unlubricated, 1/2 in.- 20 UNF bolts to 800 lb-in, produced the same mean preload of 7700 lbf. The preloads for the unlubricated bolt sample had a standard deviation from the mean value of 1100 lbf, whereas the lubricated sample had a standard deviation of 680 lbf.

  8. Robertson screw - Wikipedia

    en.wikipedia.org/wiki/Robertson_screw

    [3]: 85–86 They also allow the use of angled screwdrivers and trim-head screws. The socket-headed Robertson screws are self-centering and reduce cam out. They also stop a power tool when set, and can be more easily removed if painted over, or old and rusty. [3]: 85–86 In industry, they speed up production and reduce product damage.

  9. Unified Thread Standard - Wikipedia

    en.wikipedia.org/wiki/Unified_Thread_Standard

    The number series of machine screws has been extended downward to include #00-90 (0.047 in = 0.060 in − 0.013 in) and #000-120 (0.034 in = 0.060 in − 2 × 0.013 in) screws; [3] however, the main standard for screws smaller than #0 is ANSI/ASME standard B1.10 Unified Miniature Screw Threads. This defines a series of metric screws named after ...