Search results
Results From The WOW.Com Content Network
However, a nozzle designed for sea-level operation will quickly lose efficiency at higher altitudes. In a multi-stage design, the second stage rocket engine is primarily designed for use at high altitudes, only providing additional thrust after the first-stage engine performs the initial liftoff. In this case, designers will usually opt for an ...
The ED nozzle has been known about since the 1960s and there has been several attempts to develop it, with several reaching the level of static hot-firings. These include the 'Expansion-Deflection 50k' [2] (Rocketdyne), the 'Expansion-Deflection 10k' [3] and the RD-0126 [4] (CADB). Rocketdyne also developed a third, smaller E-D nozzle.
The expanding nozzle is a type of rocket nozzle that, unlike traditional designs, maintains its efficiency at a wide range of altitudes. It is a member of the class of altitude compensating nozzles, a class that also includes the plug nozzle and aerospike. While the expanding nozzle is the least technically advanced and simplest to understand ...
The nozzle is usually over-expanded at sea level, and the exhaust can exhibit visible shock diamonds through a schlieren effect caused by the incandescence of the exhaust gas. The shape of the jet varies for a fixed-area nozzle as the expansion ratio varies with altitude: at high altitude all rockets are grossly under-expanded, and a quite ...
For first stage rocket engines, the engine works with nozzle extension in disposed position during the first minutes of flight and expands it at some predefined level of air pressure. This scheme assumes the outer skirt of the bell is extended while the engine is functioning and its installation to working position happens in the upper layers ...
The single-engine tests were a success, but the program was halted before the testing for the two-engine setup could be completed. The XRS-2200 produces 204,420 lbf (909,300 N) thrust with an I sp of 339 seconds at sea level, and 266,230 lbf (1,184,300 N) thrust with an I sp of 436.5 seconds in a vacuum.
The increased thrust from the C-D nozzle (2,000 lb, 910 kg at sea-level take-off) on this engine raised the speed from Mach 1.6 to almost 2.0 enabling the Air Force to set a world's speed record of 1,207.6 mph (1,943.4 km/h) which was just below Mach 2 for the temperature on that day. The true worth of the C-D nozzle was not realised on the F ...
A nozzle is often a pipe or tube of varying cross-sectional area, and it can be used to direct or modify the flow of a fluid (liquid or gas). Nozzles are frequently used to control the rate of flow, speed, direction, mass, shape, and/or the pressure of the stream that emerges from them.