Ads
related to: dipole antenna height chart for homeamazon.com has been visited by 1M+ users in the past month
Search results
Results From The WOW.Com Content Network
The G5RV antenna is a dipole antenna fed indirectly, through a carefully chosen length of 300 Ω or 450 Ω twin lead, which acts as an impedance matching network to connect (through a balun) to a standard 50 Ω coaxial transmission line. The sloper antenna is a slanted vertical dipole antenna attached to the top of a single tower. The element ...
A transmatch (antenna tuner) is not required to use this antenna near its nominal design frequency of 14 MHz, and judicious length adjustments can sometimes include one other frequency band. All other frequencies require a transmatch. [citation needed] There are many variants of the G5RV antenna. Two variations of the G5RV design, called ZS6BKW ...
At least 1 ⁄ 4 of the wavelength of feedline must be at 90° angle to the antenna. [3] It is also possible to feed the antenna asymmetrically. [ 5 ] Due to the low-angle radiation pattern this antenna has, it performs well for long distance contacts (QSOs) (DX).
Inverted-'V' antenna When the two arms of a dipole are individually straight, but bent towards each other in a 'V' shape, at an angle noticeably less than 180°, the dipole is called a 'V' antenna, and when the dipole arms' end closer to the ground than their center branch-point, the antenna is called an inverted-'V' . The inverted-'V' is ...
off-center fed dipole antennas Often called “Windom” antennas – By carefully selecting the feedpoint position at about 1 / 3 of the length of a half-wavelength wire, its feedpoint impedance is nearly constant for a variety of nearly-harmonic frequencies of the half-wave frequency. All Windom-style antennas have wide coverage gaps ...
In telecommunications, the effective height of an antenna is the height of the antenna's center of radiation above the ground. In low- frequency applications involving loaded or nonloaded vertical antennas, the effective height is the moment of the current distribution in the vertical section, divided by the input current.
It is a two element Yagi-Uda antenna with folded dipole elements, and no director(s). Because of the folded ends, the element lengths are approximately 70% of the equivalent dipole length. The two-element design gives modest directivity (about 2.0 dB ) with a null towards the rear of the antenna, yielding a high front-to-back ratio : Gain up to ...
Indoor antennas are designed to be located on top of or next to the television set, but are ideally placed near a window in a room and as high up as possible for the best reception. [1] The most common types of indoor antennas are the dipole [2] ("rabbit ears"), which work best for VHF channels, and loop antennas, which work best for UHF. [3]