Search results
Results From The WOW.Com Content Network
In common usage, wind gradient, more specifically wind speed gradient [1] or wind velocity gradient, [2] or alternatively shear wind, [3] is the vertical component of the gradient of the mean horizontal wind speed in the lower atmosphere. [4] It is the rate of increase of wind strength with unit increase in height above ground level.
When estimating wind loads on structures the terrains may be described as suburban or dense urban, for which the ranges are typically 0.1-0.5 m and 1-5 m respectively. [2] In order to estimate the mean wind speed at one height based on that at another (), the formula would be rearranged, [2]
The power law is often used in wind power assessments [4] [5] where wind speeds at the height of a turbine ( 50 metres) must be estimated from near surface wind observations (~10 metres), or where wind speed data at various heights must be adjusted to a standard height [6] prior to use.
Direction shown by smoke drift but not by wind vanes 2 Light breeze 4–6 knots 4–7 mph 6–11 km/h 1.6–3.3 m/s 1–2 ft 0.3–0.6 m Small wavelets still short but more pronounced; crests have a glassy appearance but do not break Wind felt on face; leaves rustle; wind vane moved by wind 3 Gentle breeze 7–10 knots 8–12 mph 12–19 km/h
Roughness length is a parameter used in modeling the horizontal mean wind speed near the ground. In wind vertical profile such the log wind profile, the roughness length (with dimension of length and SI unit of metres) is equivalent to the height at which the wind speed theoretically becomes zero in the absence of wind-slowing obstacles and ...
u is the flow speed in m/s. It can be thought of as the fluid's kinetic energy per unit volume. For incompressible flow, the dynamic pressure of a fluid is the difference between its total pressure and static pressure. From Bernoulli's law, dynamic pressure is given by =
The design wind speed is determined from historical records using extreme value theory to predict future extreme wind speeds. Wind speeds are generally calculated based on some regional design standard or standards. The design standards for building wind loads include: AS 1170.2 for Australia; EN 1991-1-4 for Europe; NBC for Canada
The tip-speed ratio, λ, or TSR for wind turbines is the ratio between the tangential speed of the tip of a blade and the actual speed of the wind, v. The tip-speed ratio is related to efficiency, with the optimum varying with blade design. [1] Higher tip speeds result in higher noise levels and require stronger blades due to larger centrifugal ...