Search results
Results From The WOW.Com Content Network
The T4 improved this design with tapered roller bearings on the input and output shafts and a straight roller bearing on the counter gear. The T-5 is a T4 with an added overdrive gear. [ 2 ] The T-5 carries a part number of 1352-000- xxx , where xxx is a three-digit application-specific number ranging from 001 to 260 that also can be used to ...
TREMEC engineers have recommended Texaco-Havoline Dexron III/Mercon Non-Synthetic ATF. There has been a significant amount of confusion regarding the proper capacity and proper type of ATF for the TR-3650 which may have a correlation with a rather large number of complaints about notchy shifting, shift "nibbling", noisy synchros, and grinding gears.
The Mustang's front suspension makes use of MacPherson struts with longer lower control arms, new spindles, anti-roll bars, and other enhancements over 1993 and older Mustangs. At the rear, a four-bar link solid axle was used. [9] The 1994 Mustang's standard rear axle ratio was 2.73:1, though this was later changed to 3.27:1.
The largest first-generation V6 was the 2.6 L; 155.6 cu in (2,550 cc) introduced in 1969. It had a 90 mm × 66.8 mm (3.54 in × 2.63 in) bore and stroke. Output was 125 PS (92 kW; 123 hp) and 205 N⋅m (151 lb⋅ft). Applications: 1969–1971 Ford 20M RS; 1969–1971 Ford 26M; 1970–1974 Ford Capri (Not available on UK models)
2011–2017 Ford Mustang V6, GT, 2015–2017 EcoBoost; 2011–present Ford Ranger (on 3.2L and 2.2L single-turbo diesel engines) 2011–present Mazda BT-50 (on 3.2L and 2.2L single-turbo diesel engines) 2015–present Ford Everest (on 3.2L and 2.2L single-turbo diesel engines) 2015–2019 Ford Transit
The design of most manual transmissions for cars is that gear ratios are selected by locking selected gear pairs to the output shaft inside the transmission. This is a fundamental difference compared with a typical hydraulic automatic transmission , which uses an epicyclic (planetary) design, and a hydraulic torque converter .
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
The first Essex V6 released was a 3.8 L version introduced for the 1982 model year as an option on the Ford Granada. Bore and stroke were 96.8 mm × 86 mm (3.81 in × 3.39 in), for a total displacement of 3,797 cc (231.7 cu in). [1] Output was 112 hp (84 kW) at 4200 rpm and 175 lb⋅ft (237 N⋅m) of torque at 2800 rpm.