Search results
Results From The WOW.Com Content Network
The definition of activity is implementation-dependent. It could mean busy, or idle and available, or be part of a blinking pattern that conveys additional information. See section 7.4 of SGPIO. [2] 1: Activity No: 0 or 1: N/A: The activity bit is masked and not used in interpretation.
A BIOS Color Attribute is an 8 bit value where the low 4 bits represent the character color and the high 4 bits represent the background color. The name comes from the fact that these colors are used in BIOS interrupts, specifically INT 10h, the video interrupt. When writing text to the screen, a BIOS color attribute is used to designate the ...
Main page; Contents; Current events; Random article; About Wikipedia; Contact us
Elektronika B3-34 (Cyrillic: Электроника Б3-34) was a Soviet programmable calculator. It was released in 1980 and was sold for 85 rubles . B3-34 used reverse Polish notation and had 98 bytes of instruction memory, four stack user registers and 14 addressable registers.
A 2.26 kΩ, 1%-precision resistor with 5 color bands (), from top, 2-2-6-1-1; the last two brown bands indicate the multiplier (×10) and the tolerance (1%).. An electronic color code or electronic colour code (see spelling differences) is used to indicate the values or ratings of electronic components, usually for resistors, but also for capacitors, inductors, diodes and others.
The requirements of a flicker measurement equipment are defined in the international electro-technical standard IEC 61000-4-15. [2]A flickermeter is composed of several function blocks which simulate a 230 V/60 W or a 120 V/60 W incandescent lamp (reference lamp) and the human perception system (eye-brain model).
The ATX specification requires that the power-good signal ("PWR_OK") go high no sooner than 100 ms after the power rails have stabilized, and remain high for 16 ms after loss of AC power, and fall (to less than 0.4 V) at least 1 ms before the power rails fall out of specification (to 95% of their nominal value).
An opcode table (also called an opcode matrix) is a visual representation of all opcodes in an instruction set. It is arranged such that each axis of the table represents an upper or lower nibble, which combined form the full byte of the opcode.