Search results
Results From The WOW.Com Content Network
The double rapier is used more frequently than the single rapier due to its increased pick insertion speed and ability to weave wider widths of fabric. The housing for the rapiers must take up as much space as the width of the machine. To overcome this problem, looms with flexible rapiers have been devised. The flexible rapier can be coiled as ...
Weaving a tapestry on a vertical loom in Konya, Turkey A Turkish carpet loom showing warp threads wrapped around the warp beam, above, and the fell being wrapped onto the cloth beam below. A simple handheld frame loom. Weaving is done on two sets of threads or yarns, which cross one another.
Help; Learn to edit; Community portal; Recent changes; Upload file; Special pages
With each weaving operation, the newly constructed fabric must be wound on a cloth beam. This process is called taking up. At the same time, the warp yarns must be let off or released from the warp beams. To become fully automatic, a loom needs a filling stop motion which will brake the loom, if the weft thread breaks.
A weaving shed, showing how all the looms were powered from overhead shafts. The early mills had a vertical shaft to take the power from the flywheel. On each floor horizontal shafts engaged with the main shaft using bevel gearing. American mills used thick leather belts instead of shafts. A new approach was to use thick cotton ropes.
A loom from the 1890s with a dobby head. A dobby loom, or dobbie loom, [1] is a type of floor loom that controls all the warp threads using a device called a dobby. [2]Dobbies can produce more complex fabric designs than tappet looms [2] but are limited in comparison to Jacquard looms.
This was then passed through the finisher card to produce the rovings [7] This process was known as double carding. The Derby Doubler was patented by Evan Leigh of Ashton-under-Lyne (21 December 1810 – 2 February 1876) and, though superseded, still continued in service in condensing coarse counts.
Holding the reed beater bar in the left hand, and the (picking-stick-mounted) string tugged to return the flying shuttle in the right hand.See video below. In a typical frame loom, as used previous to the invention of the flying shuttle, the operator sat with the newly woven cloth before them, using treadles or some other mechanism to raise and lower the heddles, which opened the shed in the ...