Ads
related to: tire size definition chart for motorcycles images and information
Search results
Results From The WOW.Com Content Network
As the early motorcycle industry progressed, larger tyre sizes accompanied larger engine displacements, so that by 1909–1914, 2 + 1 ⁄ 4 in (57 mm) section, 26 in (660 mm) diameter tyres were used on 250 to 350 cc (15 to 21 cu in) motorcycles, and 2 + 3 ⁄ 8 to 2 + 1 ⁄ 2 in (60 to 64 mm) section tyres appeared on motorcycles with ...
Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.
Increasing the aspect ratio will increase the height of the tire and hence the circumference. Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as ...
ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and Rim Technical Organisation (ETRTO). It is designed to make tire sizing consistent and clear.
The following outline is provided as an overview of and topical guide to tires: Tire (North American) or tyre (British) – ring-shaped covering that fits around a wheel rim to protect it and enable better vehicle performance by providing a flexible cushion that absorbs shock while keeping the wheel in close contact with the ground.
Cutaway diagram of a rim and tire from an ATV Cross section of a bicycle rim A wooden bicycle rim with tubular tire The rim is the "outer edge of a wheel, holding the tire". [ 1 ] It makes up the outer circular design of the wheel on which the inside edge of the tire is mounted on vehicles such as automobiles . [ 2 ]