Ads
related to: scotch 35 tape specs chart
Search results
Results From The WOW.Com Content Network
A 1990 comparative test of 35 Type I tapes showed that their optimal bias levels were within 1 dB of the Type I reference, while Type IV tapes deviated from the Type IV reference by up to 3 dB. [27] Some typical cassette deck frequency response curves showing the effects of different bias settings are provided in the relevant figure.
The first commonly available increase in tape length resulted from a reduction in backing thickness from 1.5 to 1.0 mil (38 to 25 μm) resulting in a total thickness reduction from 42 to 35 μm (1.7 to 1.4 mils), which allowed 3,600 ft (1,100 m), 1,800 ft (550 m), and 900 ft (270 m) tapes to fit on ten-and-a-half-, seven-, and five-inch reels respectively.
These spools and their attendant parts are held inside a protective plastic shell which is 4 by 2.5 by 0.5 inches (10.2 cm × 6.35 cm × 1.27 cm) at its largest dimensions. The tape itself is commonly referred to as "eighth-inch" tape, supposedly 1 ⁄ 8 inch (0.125 in; 3.17 mm) wide, but actually slightly larger, at 0.15 inches (3.81 mm). [8]
Cassette tape, a two-spool tape cassette format for analog audio recording and playback and introduced in 1963 by Philips; DC-International, a format that was created by Grundig after Phillips had abandoned an earlier format that was being created alongside the Compact Cassette; 8-track tape, continuous loop tape system introduced in 1964
A Scotch brand box sealing tape Modern Scotch brand acetate [clarification needed] tape packaging showing the distinctive tartan design. Although Scotch is a trademark and a brand name, Scotch tape is sometimes used as a generic term, [6] [7] in a similar manner to Sellotape in several other countries. The Scotch brand includes many different ...
The tape is pulled from the supply reel by a capstan and pinch roller, similar to those used in audio tape recorders. The tape passes across the erase head, which wipes any existing recording from the tape. The tape is wrapped around the head drum, using a little more than 180 degrees of the drum.